AN fittings are a flare fitting, using 37° flared tubing to form a metal-metal seal.
Victaulic makes a dielectric fitting that could solve your issue.
Ergonomics
No. You'll need a strong back.
Yes, if you can find work.
measure the length of the fitting first. Then insert pipe into fitting and mark a line on pipe. measure that bit of pipe. deduct off the length of fitting and half it to give you your x dimension
IT IS THE MOST USED ON UNDERGROUNG PIPE WORK
5 Minute Work Out Anywhere - 2013 Get Fit in the Fitting Room 1-22 was released on: USA: 8 July 2013
Online business for vehicle number plate designing, printing, and door service for fitting can work across Indian cities.
No, you'll need to put a pipe adapter on the PVC, then use a standard PEX crimp fitting. Or you can use a SharkBite fitting. They work well for this.
No, but any drop forwards with the standard two hole fitting will work.
fitting is a to fit the two joints correctly, it s work properly
If this confuses you then you best get an electrician. However it sounds like there is short in either the wiring to the light fitting or the light fitting itself. try removing the light fitting and see if the problem goes away.See View discussion below.