It's not so much that the insulator absorbs the shock of impact, rather it insulates the coil spring from the strut cartridge. If you don't install an insulator, you'll end up with metal-to-metal contact which can lead to squeaks and other noises as you go down the road. And of course any time you have that contact, you'll eventually (probably rather quickly) wear off any protective coatings/paints and will then introduce corrosion to both the spring and the cartridge's apron. Considering the amount of tension the spring places on the cartridge, I don't see where the two would separate and then bang back together while going over a bump/pothole, but I'm fairly certain you'll be able to hear it squeaking as they rub together.
I'm not a mechanic nor do I recommend this, but if you're looking for a cheap way out, you could buy a tube of urethane and fill the apron, place a plastic film over it and then make an imprint with the coil spring. Bear in mind that the insulator does have a preset location/reference so you'd really have to do some aligning to get this right but then you could pull the spring back out, let the urethane cure, and then assemble it.
To absorb some of the energy from a low impact accident.
To absorb some of the energy from a low impact accident.
Maybe you are not absorbing the impact with your legs correctly. Because bmx bikes have no suspension, you have to absorb the shock
The insulator in a light bulb prevents us from getting an electric shock.
Dry straw is an insulator.
mabye they "absorb shock!" 2nd Answer: In actual fact, shock absorbers do not absorb shock: the springs do that. The "shock absorbers" dampen rebound (Bouncing). In a bike, the spring is built right around the dampener part.
Alcohol acts as an insulator because it can't freeze and its ability to absorb energy.
A shock absorber can be found underneath the engine in a car between the engine and the wheels. It is is used to absorb the impact that the wheels hitting the road can have on the car. It can be seen and accessed from beneath the car.
No mosquitoes do not absorb shock so if your having problems with them go to you local store and buy a electric swatter!
Yes
No. You are not supposed to use a regular socket on an impact wrench. You need a hardened or impact socket.No, you do not use a hardened socket... impact sockets are made with a softer steel, which makes it able to absorb the shock of being hammered on by an impact wrench.
absorb shock