diz is a controversial question,anyway i write my opinion
since E is directly proportional to f (E=4.44fBAT).....therefore the KVA changes on change of frequency..........
this is common thought,but what the controversial thing is why the current can't compensate the KVA rating to maintain it constant........
IN GATE book of G.K publishers the answer is IT DOES NOT AFFECT.
I don't understand your question. Are you asking how to convert from 60hz to 25hz using a transformer? That cannot be done. Frequency in = frequency out.
What limits the use of a transformer is its operating temperature, as excessively-high temperature will act to break down its insulation. The temperature reached by a transformer is a function of its rating (expressed in volt amperes), so operating a transformer below its rating is perfectly okay.
Any transformer can be overloaded by applying a load above the capacity rating of the transformer.
VA or KVA or MVA
Because a transformer is a big lump of metal that takes time heat up, so if the load is on and off in a short time, the load rating can be exceeded.
I don't understand your question. Are you asking how to convert from 60hz to 25hz using a transformer? That cannot be done. Frequency in = frequency out.
A transformer can be used to change the voltage to an appliance. The voltage rating of the transformer should be right for the voltages used, and the current rating of the transformer should not be less than the current drawn by the equipment.
The rating of a transformer follows the two magnitudes that affect its operation; Volts and Amperes. The other, more popular parameter (kW) is not used on transformers because it depends on connected load Power Factor.
100MVA
Depends on the kva rating of the devices to be tested using a transformer.
Transformers are rated in V.A (volt amperes), rather than in watts. You will need to determine the rated power (in watts) of the Mixdeck, and then ensure your transformer's rating exceeds this value. You will also need to determine whether the change from 60 Hz (US) frequency to 50 Hz (UK) will affect the operation of the machine.
Knowing the power rating of a transformer will help an operator use the transformer within its design limitations with regard to heating of the windings and their insulation.
What limits the use of a transformer is its operating temperature, as excessively-high temperature will act to break down its insulation. The temperature reached by a transformer is a function of its rating (expressed in volt amperes), so operating a transformer below its rating is perfectly okay.
yah! definately affects, the kva of transformer is suitable for the certain load according to the rating.
In generator station the power which produced is real power the real power to me mentioned in its's factor so it is mentioned as KW or MW. In transformer there is no effect of change the power factor (ie:cos,phi) and the power which transfer do not changes its frequency. so, in Transformer and generator it is mentioned as KVA.
Any transformer can be overloaded by applying a load above the capacity rating of the transformer.
The amp rating for a 100VA transformer will vary depending on the actual voltage of the transformer. Transformers have both a primary and a secondary voltage.