answersLogoWhite

0


Best Answer

Firstly, the water pump itself is identical to any other Chevy 350 v-8 water pump from the 70s. If you know about auto engines already, there's no big secret or surprise. If not, please read on. It's always a good idea to have someone who knows about cars help you. Start by taking a picture or mental note of what the engine looks like before removing parts. Have something handy to hold all the hardware and keep it from getting misplaced (I can't tell you how many essential nuts/bolts I've lost by not doing this) First, undo the lower radiator hose and drain the coolant into a clean pan (1-2 gallons) Using a clean pan helps you put the coolant back and not waste it. Then, remove the nuts that hold the fan and water pump pulley together. Take the fan and pulley out from their place. Before continuing, make sure it's the water pump. An easy way to do this is to grab hold of the studs where the fan bolted on and try to make it wiggle. If it does, you know that the pump is bad. Next, unbolt the water pump and remove. Reverse this process to install new one. Hope that helps! -ku2002

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How does one change a 79' corvette water pump?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you change the water pump on a 1993 Mitsubishi diamante?

Ooh, this is a fun one. The water pump is driven by the timing belt, so you have to remove and replace that to change out the water pump. ~Pengauin


Do you have to remove the timing chain to change a water pump 4 cylinder?

If you have timing chain it means that your water pump is connected to one of the belts. So the answer is no. But make sure that you have timing chain. Because if you have timing belt then the water pump is connected to the timing belt. And the latter one has to removed if you want to change the pump.


How do you change water pump belt on a caterpillar c7?

A water pump belt can be replaced by removing the old one. The new water pumb belt will be installed in the same way as the old one.


How do you change a water pump on a 2003 Pontiac Sunfire?

Take it out and put a new one in!


How do you change a water pump on a 1995 dodge truck?

you take out the old one, and put in a new one


How do you replace the water pump on a 1998 GMC Sonoma sls?

the water pump on the 4.3L vortec is easy. there are four bolt holding the water pump in place. these bolt hold your fan clutch also. the water pump and fan system.are built as one. remove these bolts and you are ready to change your water pump.


How to change out a water pump on a series 60 Detroit diesel?

To change out a water pump in a Series 60 Detroit diesel, you need to locate the water pump in the engine. You need the right tools to remove all the fittings and take the pump out, them replace it with a new one. The owners manual has a list of all engine parts and diagrams.


How do you change the water pump on a 1996 Mazda 626?

To change the water pump on a 1996 Mazda 626 you have to follow a few step. First you disconnect the miscombobulater from the alternator valve. Then you take the water pump off and put the new one on. Lastly you re -attach the miscombobulator and the altornator valve. There you have it.


How do you change water pomp on 98 Toyota Avalon 3.0 L?

You should change your water pump for 4 to 5 years after you put in your first one.


How do you change the water pump on a 2000 jetta VR6 with pictures?

Get the correct water pump and clutch for your car. Loosen the alternator and remove the fan. Remove the bracelets, hoses and the retaining bolts. Remove the water pump and replace it with the new one.


Where is the fuel pump relay located on a 1986 Corvette?

fuel pump relay located on the engine compartment firewall driver side. The fuel pump relay is located under the dash on the passenger side of the 1986 Corvette. Their are 2 under that location one is the overdrive relay and the fuel pump relay. Devyn (


How do you change a water pump on a Chrysler Cirrus?

It is fairly difficult to change a water pump on a Chrysler Cirrus. First, you remove the crankshaft pulley, remove one engine mount, take off the timing belt, and finally gain access to the pump. You can then feel free to switch them out.