The resistance of a simple conductor normally rises as its temperature rises.
resistivity and resistance are two diff. things...........resistance depends on length and thickness resisitivity too depends on the area and length resistivity=resistance*area/length
Conductor resistance = Conductor resistivity * Length of conductor / Cross sectional area of conductor. So. It is directly proportional to material & conductor length. And inversely proportional to the cross sectional area of conductor.
The resistance of a conductor is directly proportional to the resistivity of the conductor. since the resistivity of a conductor is decreases with decrease in temperature hence the resistance.
Please note that resistivity also depends on temperature.In the most general case, the answer is definitely NO; all superconductors have the same resistivity, namely zero. Other than superconductors, take a look at a table with some typical resistivity values. It would seem quite obvious that for a given temperature: * Two different substances will, in general, have different resistivities. * In practice, in some cases the difference in resistivity might be too small to reliably measure. * It should be possible to find two substances that have the same resistivity at a very specific temperature - since the temperature-dependence will vary from one material to another. * Likewise, it should be possible to design a mix of two substances, which exactly matches that of another, given, substance.
1. Use of short length radial conductors bonded at the injection point. rather than a single long length conductor. This produces the effect of having a number of conductors in parallel. 2. Terminating radial conductors with vertical electrodes. This measure is more effective in low to medium soil resistivity. 3. Using large bending radii when changing the direction of horizontal conductors. Sharp bends tend to increase the inductance. 4. The use of earth enhancing compounds to improve the soil resistivity in the proximity of the conductors which will reduce the tower footing resistance
The resistance of pure metallic conductors increases with temperature, because the resistivity of these conductors increase with temperature.
The length, cross-sectional area, and resistivity. As resistivity changes with temperature, temperature indirectly affects resistance.
There is no 'formula' for resistivity. The resistivities of different conductors have been determined by experiment.
Conductors, semiconductors and insulators.....
Electrical resistance depends on the temperature but not the biased voltage.AnswerIt's resistivity that can be affected by temperature, which means that resistance is indirectly affected by temperature.
A semiconductor's resistivity decreases with increasing temperature. A metal's resistivity increases with increasing temperature.
You mean positive temperature coefficient? Yes conductors as they get heated then due to the nucleii vibrating with greater amplitude would have a grip over the moving electrons and so the resistivity increases with the increase in temperature. Hence positive temperature coefficient.
Those which have resistivity in between conductors and insulators are known as semi conductors. Germanium and Silicon are very good examples of semiconducting materials whose resistivity of the order of 10 -2 to 10 4 ohm meter.
There are really only three things that affect electrical resistance. They are the length and cross-sectional area of a conductor and its resistivity. However, resistivity depends not only on the material from which the conductor is manufactured, but upon its temperature. So you could say that temperature indirectly affects resistance via its resistivity.
Electrical Resistance depends on three factors: Resistivity; Area; Length.Resistivity is the property of the matter. More Resistivity means more resistance.More Area means less resistance.More length means more resistance.R= Resistivity. Length/Area
Temperature, Length of wire, Area of the cross-section of wire and nature of the material.
Electrical resistivity (also known as resistivity, specific electrical resistance, or volume resistivity) quantifies how strongly a given material opposes the flow of electric current. A low resistivity indicates a material that readily allows the movement of electric charge. Resistivity is commonly represented by the Greek letter ρ (rho). The SI unit of electrical resistivity is theohm⋅metre (Ω⋅m)It defined as resistance offerde by a unit length and cross section area conductor.It depends on material used.it depends on relexation time and temperature.