1. Use of short length radial conductors bonded at the injection point. rather than a single long length conductor. This produces the effect of having a number of conductors in parallel.
2. Terminating radial conductors with vertical electrodes. This measure is more effective in low to medium soil resistivity.
3. Using large bending radii when changing the direction of horizontal conductors. Sharp bends tend to increase the inductance.
4. The use of earth enhancing compounds to improve the soil resistivity in the proximity of the conductors which will reduce the tower footing resistance
reactor
No such resistor exists. Any resistor placed in parallel with a 6.0 ohm resistor is going to reduce the combined resistance below 6.0 ohms.
Isolated footing Transfers individual column loads directly to the soil. If a single spread footing interferes with another spread footing, the two can be combined to form a combined footing.
Combined footing
Yes, a concrete patio step does in fact need to be on a footing. Without the proper footing foundation, the step will be uneven.
Doubling the diameter of a circular-section conductor will quadruple its cross-sectional area and, therefore, reduce its resistance by a quarter. Doubling the length of a conductor will double its resistance. So, in this example, the resistance of the conductor will halve.
footing resistance is that resistance which could not harm human body while touching tower...and it is calculated by earth resistance tester
The tower symbolizes human resistance to God's will.
no
You don't "resist" it but you "reduce" it. For example, many vehicles and projectiles are made in a streamline design to reduce air resistance.
Reduce current - reduce power.
divide frequency
to reduce air resistance or drag.
To reduce air resistance.
A: Any resistance added in series will reduce the current unfortunately will also reduce the voltage
A: Any resistance added in series will reduce the current unfortunately will also reduce the voltage
The resistance needed is1/(the current flowing through the resistance) ohms.
footing is footing and fooot foot foot foot