yes the motor will run but will draw more current and the torque will be not constant means not smooth due to unbalanced current
Yes, it can. Then you can use the charge to power something else. :)
we can either use dc series motor or induction machine ,but dc supply is not easily available so we use induction motor ,
There is no 'total voltage' in a three-phase system. There are three line voltages and three phase voltages.
3 core 35 sq mm alu. Or 3 core 25 sq mm cup.
That happens when the supply is turned off, and the motor runs down and stops.
To start an induction motor we have to excite field. The excitation is done by connecting the DC supply to the field winding's.
Two-phase supplies, in which the phase voltages are displaced from each other by 90 degrees, are less economical than three-phase systems.
usually they say its possible 2 convert a 2phase supply to 3 phase.if its so then how?
i think in case of dc supply there will not be any induction
Yes, it can. Then you can use the charge to power something else. :)
because the power still are in circuit of the motherboard and you have to drain the system
we can either use dc series motor or induction machine ,but dc supply is not easily available so we use induction motor ,
Please don't disconnect the electricity supply.
There is no 'total voltage' in a three-phase system. There are three line voltages and three phase voltages.
One of the disadvantages of the 3 phase induction motor is that it requires a three wire supply. The other disadvantage is that the 3 phase induction motors have poor starting torque and high have in the rush currents.
3 core 35 sq mm alu. Or 3 core 25 sq mm cup.
its impossible to give suppy to rotor of an induction motor,because of it a closed path for circulating currents.