0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Will 1993 Chevy suburban engine and transmit ion work in a 1995 Chevy pick up?
Yes But they have different plug ins on the throttle body so you will have to you will have to swap the throttle body also
Why Throttle body spacers do they work?
Throttle body spacers increase the air volume between the engine and the throttle body.
1996 jeep Cherokee throttle position sensor location?
It is located on the outside of the throttle body in line with the butterfly. Remove the air intake from the throttle body and it will be accessable on the back side of the throttle body. Easier to work on if you remove the throttle body. Easier to clean it too.
Where is the starter located on a 1993 Acura Vigor?
The starter is hidden under the throttle body. Also very hard to get to, not to mention hard to see. I'd recommend having a professional do the dirty work.
Will cylinder heads on 87 3.9 liter work on 97 3.9 liter dodge?
No, the throttle body and multi port heads are not interchangeable.No, the throttle body and multi port heads are not interchangeable.
How do you raise an lower rear head rest on a 1989 300e Mercedes Benz?
I'm not sure about your 1989 model but on my 1993 300E the rear headrests are raised manually but lowered by a switch on the dashboard. Since they are both 124 series I would think yours would work the same.
Where is Taurus throttle body?
On the engine inline with the air intake duct work.
Do throttle body spacers really work?
Yes, throttle body spacers do really work, however, it typically depends on the specific engine involved as they work better on some engines than others. Their function is simply to alter the airflow into the intake manifold.
Can a blow off valve work on a supercharged car?
On a centrifugal supercharger(Paxton, vortech, procharger-yes. On a whipple /eaton- no because they are located between the throttle body and engine, BOV only work when the throttle body is between the supercharger and engine.
Is it your throttle body when your truck shuts off at a light or complete stop?
It is possible. Try cleaning your throttle body. If this does not work, search for vacuum leaks in your intake. Then check your idle speed at operating temperatures.
Will the wiring harness for a 2.8 throttle body work on a 4.3 with central port injector?
Nope
How do you replace a throttle position sensor on a 1993 Lincoln Mark VIII?
follow the air induction to the throttle body. it is right behind it in front of the fire wall. good luck I believe this model is the same as the 95. In that case, pull the throttle body off first. 4 8mm bolts and it is very easy to work on. You don't have to disconnect the accelerator cable, you can just move the TB to the side. There are 2 screws that hold it in place. You should also replace the gasket for the TB.
