Want this question answered?
the voltage at which electronic device operates is callled threshold voltageand the voltage at which device show cinduction in forward biased stste
the voltage above which any device starts conducting
maximum generated voltage is 21KV
A biopotential is a biologically or biochemically-generated potential or voltage.
I guess it depends on the design of the generator. In the plants I know in th UK it is usually 11 KV
It is called the threshold voltage and is around -70 mvolts.
assignment sa physiology ceu? XD
assignment sa physiology ceu? XD
the voltage at which electronic device operates is callled threshold voltageand the voltage at which device show cinduction in forward biased stste
the voltage at which the current conduction occur
the device oprates on the minimum voltage. in this voltage is called threshold voltage.
1.5
A Schmitt Trigger is a comparator, because it compares its input voltage to a "threshold" voltage, but it has _two_ threshold voltages (the upper and lower trigger voltages), and which threshold voltage is used depends on the output state. If the input voltage is higher than the upper trigger voltage, the output will be high (for a non-inverting Schmitt trigger). In this state, the input is compared to the lower threshold voltage, so the input now has to go below the lower threshold voltage before the output will go low. The threshold voltage depends on the output state, such that a high output selects the lower threshold voltage, and a low output selects the upper threshold voltage. This can be visualised as using a fixed threshold but adding a small voltage (the difference between the upper and lower threshold voltages, also called the hysteresis voltage) to the input voltage before it is compared. This small added voltage is high when the output is high, and low when the output is low. A small amount of the output voltage is effectively being added to the input voltage before it is compared to a fixed threshold. This is positive feedback, also called regenerative feedback. So a Schmitt trigger operates as a voltage comparator, and a small amount of the output is added to the input, so it uses positive or regenerative feedback.
1.7 volts
3.0V
the voltage above which any device starts conducting
Yes, it can be because threshold and rheobase both are the voltage required to generate an action potential. The difference lies in that the treshold can be a voltage higher than rheobase.