Yes, you can. Use a centre punch first so your drill bit doesn't 'skid' on the shiny surface.
A center punch (not centre) looks like a metal pencil. You place the point on an object and hit it with a hammer to leave a centering mark on the object. Then when you go to drill a hole the drill bit will not move from where you placed the mark. This way the hole will be where you wanted to drill. Without it the drill tends to move around as it spins until the hole is started.
If it fits in the chuck straight, yes you can use it. It will be much more effective in a rotary hammer drill though.
A punch is for making holes or marking a spot to centre a drill bit.
It is the process of drilling a locating hole at the end of a shaft while machining between centres.
Today seed drills are more effective because they are much faster and precise than they use to be. They also don't waste seed.
with a drill bit......ANS 2 - It helps if you use an automatic centre punch first, so the bit doesn't slide. Also it's better if the drill bit is NOT new, so the edges are not extremely sharp. Drill at a fairly low speed (450-500 rpm) for best results. ( This all applies to Plexiglass too )
Yes It could be extremely dangerous to drill at that point. There is no telling where the wires from that panel go. If you drill into the hot wire from the pole, you will be electrocuted because there is no effective ground between it and the ground. It will turn you into barbecued chicken. You can turn off the circuit breakers for any other room in your house where you wish to drill and drill away. You can use an extension cord to a different room for power. Or, you can be buried next to John Wilson.
1) National Committee for an Effective Congress 2) National Chemical Emergency Centre (UK)
Most likely to train people how to become effective call centre representatives.
A drill machine can mean a hand held electric drill, or a bench drill press or a pillar drill.
Yes. You can increase the period by moving the pendulum to a location where the gravitational force is weaker.Alternatively, you can increase the effective length of the pendulum. The pendulum may be of fixed length, but you can still increase its effective length by adding mass to any point below its centre of gravity.Yes. You can increase the period by moving the pendulum to a location where the gravitational force is weaker.Alternatively, you can increase the effective length of the pendulum. The pendulum may be of fixed length, but you can still increase its effective length by adding mass to any point below its centre of gravity.Yes. You can increase the period by moving the pendulum to a location where the gravitational force is weaker.Alternatively, you can increase the effective length of the pendulum. The pendulum may be of fixed length, but you can still increase its effective length by adding mass to any point below its centre of gravity.Yes. You can increase the period by moving the pendulum to a location where the gravitational force is weaker.Alternatively, you can increase the effective length of the pendulum. The pendulum may be of fixed length, but you can still increase its effective length by adding mass to any point below its centre of gravity.