0
What else can I help you with?
Centric Brakes?
form_title= Centric Brakes form_header= Install centric brakes in your car. Do you have a brand preference?*= () Yes () No If so, what is it?*= _ [50] Will you install the brakes yourself?*= () Yes () No What is your budget for brakes?*= _ [50]
Are sheet metal brakes hard to install?
Sheet metal brakes can vary in complexity of installation depending on the type and size. Basic manual brakes are generally straightforward to set up, requiring minimal assembly. However, larger hydraulic brakes or those with advanced features may need professional installation to ensure proper functioning and safety. It's always recommended to refer to the manufacturer's instructions and, if unsure, seek assistance from a professional.
Can you convert a 1993 Honda accord with drum brakes to disc brakes without buying after market components?
i converted mine it rear disc brakes,, I went to the junk yard and stripped out one from an EX,, to install in my LX,, lots of work but not hard
How to install an Electric brake?
To install electric brakes, first remove the wheel. Then remove the dust cap, nut, and washer; this will be the place where you install the electric brakes.
How do you install hand brakes?
with your hands
Why is it hard to stop in a 1988 silverado you change the brakes and bleed them?
you change the brakes,check brakes fluid,bleed the brakes why is hard to stop in a 1988 sliverado?
What is the cost of brakes for a car?
New brakes for a vehicle depends on the type of car that you have. The more expensive the car, then the more the brakes would cost. For front brakes on a less expensive vehicle could cost anywhere between $40-150. The back brakes are higher.
Installation and cost of brakes?
Brakes are expensive if you need all new brakes. Expect to pay in the hundreds. Depending on your car and how many brakes need servicing.
How can I install hydraulic disc brakes on my bicycle?
To install hydraulic disc brakes on your bicycle, you will need to first remove the existing brakes and brake levers. Then, install the hydraulic brake calipers and attach the brake lines to the levers. Bleed the brakes to remove any air bubbles and ensure proper function. Finally, adjust the brake pads and test the brakes before riding.
How do you install hand brakes on a bike?
To install hand brakes on a bike, first, remove the old brakes if necessary. Then, attach the brake levers to the handlebars and connect the brake cables to the levers and the brake calipers. Adjust the tension of the cables and test the brakes to ensure they are working properly.
Disc Brakes?
form_title= Disc Brakes form_header= Repair or install disc brakes. Do you need new brake pads?*= () Yes () No What is your budget for disc brakes?*= _ [50] When were your brakes last checked?*= _ [50]
Are the brakes of a 68 mustang supposed to be hard to push?
Compared to todays modern brake systems they will feel hard. Also depends on if they are power brakes or not. Some cars of that era did not have power brakes and they were very hard to push.
