While the power of the engine affects the top speed of a boat, it does not determine the speed of the boat, as other factors influence the speed. Those include the shape and design of submerged part of the boat, the shape and design of the not submerged part of the boat, the wind and water conditions, the drive (gears, propeller, etc).
While it is not possible to determine the top speed of this boat without more details, it is fair to say that it should go "pretty fast," as a 12 ft boat is not very large, and 10hp provide a fair amount of power for such a small boat.
yes, a way to find out if it weighs more, which has a greater density
9
None. Board foot is a measure of volume not area.
You can't without the width and thickness of the item - board feet is a volume measurement, linear feet is a linear measurement. 12 board feet are one cubic foot.
A board foot is a unit of volume equivalent to 144 cubic inches. To find tons, you would need to know the density of the particular wood that you are interested in. ==================================================== Boardfeet is based upon nominal dimensions. For example the nominal dimensions of a 2x4 is 2" x 4". It's actual dimension is closer to 1 1/2 inches x 3 1/2 inches. So there will be some error in the calculation if you are attempted to determine the weight of dimensional lumber. Southern Pine weights approximately 40 lbs per cubic foot. There are 1728 cubic inches in a cubic foot. There are 2000 lbs in a ton. therefore the weight of one board foot (conservatively because of the nominal dimensions) is: (40x144)/(1728x2000) tons per board foot. Sorry , don't have a calculator handy. Another way to do it is that there are about 12 board feet in a cubic foot. So a board foot would weight 40/12 lbs or 3.33 pounds. 3.33 pounds is 3.33/2000 tons. !! a lot easier!! (southern yellow pine) glenn
Depends if it fiberglass or Aluminium. For Fiberglass you would be looking at around 50hp-60hp and and Aluminium would be between 30hp and 40hp.
32-37
it is very fast
19 mph
Speed is dependant on a number of factors. Most importantly the size, type and weight of the boat that it is on and the number of people on board. A 50 HP outboard will push a small aluminum fishing boat a lot fast than it will a 20 ft fiberglass boat. I have a 50 HP 2 stroke that will push a 16 foot aluminum boat 35 MPH.
One USCG-approved PFD for each person
id say around 75 mph we have the same motors on a 25 foot coast gaurd boat
About 10 to 12 on plane
You have to first put your foot on the middle of the skate board, then you put your other foot on the back of the skateboard and push that down and slide your other foot up the board and see if you got any distance from the ground. oh ya and u have to do it really fast or u will mess up.
width of 12 foot aluminum boat
can you pull a 36 foot house boat with a pickup truck
It depends a lot on the size of the boat. If it say, a 12 foot boat, probably about 7 or 8 knots (about 10 mph). On a bigger boat slower. As was said these small engines are used mainly for dinghies and for fishing. Answer: I have a 8 foot fiberglass dinghy with a 4 Hp outboard. My GPS says 11km/h under full throttle on a calm lake.