answersLogoWhite

0

The frequency is determined by the operational speed of the generators in the power plant and is very closely related to the RPM of the generators (it might only differ in a constant multiplier).

Depending on the load of the grid a proper torque must be applied on the generators to generate voltage with the proper frequency. Once the AC is out in the grid its frequency is much less prone to environmental effects than its voltage.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What is the electric grid frequency for Turkey?

The electric grid frequency in Turkey is 50 Hz.


What happens when the grid frequency drops?

When the grid frequency drops, it can lead to power outages and disruptions in the electrical system. This drop in frequency can be caused by an imbalance between the supply and demand of electricity, which can strain the grid and potentially damage equipment. It is important for grid operators to monitor and manage the frequency to ensure a stable and reliable power supply.


What is the frequency of north American grid?

60Hz


Why frequency in power grid is maintained constant?

Maintaining a constant frequency in the power grid is crucial to ensure the stability and reliability of the grid. A constant frequency allows generators to stay in synchronization, preventing outages and damage to equipment. It also ensures that connected devices and machinery operate correctly and efficiently.


What frequency rate is used for three phase operation?

Can be any frequency but is most likely to be the grid frequency - 50/60 Hz.


What the frequency of a grid does?

50 herzes in INDIA and 60 hz in USA


What is the effect of low grid frequency?

Any equipment that is dependant upon frequency will be effected. Synchronous motors will slow down.


What is the frequency of the secondary of a 230 volt step down transformer?

The frequency is dependant upon what electrical grid that you are connecting the transformerto. If you are connected to a 50 Hz grid, the transformer will output a voltage at 50 Hz. The same thing with the 60 Hz grid, the transformer will output a voltage at 60 Hz.


Why does the synchroscope need to be rotating clockwise if it is turning slowly counterclockwise won't that work the same?

because the incoming generator has be connected as a source and not a load to the grid. if the frequency of the incoming generator is lower than the grid frequency then ... it will behave as a motor drawing power from the grid and generator will trip in reverse power protection.


How do you break the playfair cipher?

The Playfair is susceptible to digraph frequency analysis. Separate the plaintext into digraphs and do a frequency count. Once you've found that, compare the digraph frequency of the ciphertext to the digraph frequency of English and see how it might fit in to the Playfair grid. An intimate understanding of how letters in the grid relate to each other and implications of how the grid is affected by correspondences between the ciphertext and plaintext is critical. I'll try to post a help video on YouTube in the near future.


What is the difference between grid and smart grid?

The term "grid" was used before computer control of active and reactive forces, phase and frequency control, etc, the grids were ad hoc, they behaved according to the stresses and demands on them. A "smart grid" is monitored and controlled in such a was that it remains stable under a much greater span of circumstances than was possible previously.There is no difference because grid dosn't exist. Smart grid is the name given to the next network which will allow infrastructure to interact between them in order to manage better needs of electricity. Also smart grid include new sources of energy like solar panels and wind turbine. That's why we say it is "smart".


How do you control the speed on an ac motor?

the speed of ac motor can be controlled by controlling the synchronous speed (Ns=120f/p). and synchronous speed can be varried or controlled by changing frequency or by changing poles. but practicaly pole can not be changed. but we can change the frequency. the frequency can be VFD (Variable frequency Drives). so the speed of ac motor can be chaged or controlled by VFD.