it's hard! you have 2 knock sensor under you plastic intake. than you take your intake off you will see a wire with two black top about 1 1/2 to 2 in. pop those off and there there they are. it is a good idea to replace them both and get you a new wire from the dealer fro the knock sensor. i hate to hear you have to do it twice just cause you did not want to buy the knock sensor wire. and if you careful you can save the intake gasket. be sure and buy all you parts first. 2 knock sensors , knock sensor wire and intake gasket. if you don't used it take it back .
The 2002 Silverado 4.8 liter engine knock sensor is located on the back of the crankshaft. The back engine cover will need to be removed in order to view the sensor.
I know it is under the intake manifold but it is impossible to get to. do i just take o ff the maniold can i see were its located
Its under the intake manifold.
under intake
There is 2 of them and thay are under the intake manifold. You will have to remove intake manifold to get to them.
The knock sensor is on the passenger side of the motor along the top of the oil pan about half way on the block.
There is two of them. They are located under the intake manifold. There is two of them. They are located under the intake manifold.
That engine has 2 of them and there both underneith the intake manifold. You can not see are even get to them until you remove the intake.
There are 2 sensors on the 6.0L and both of them are under the intake manifold. You can not see them are even get to them until you remove the intake.
The knock sensor is located under the Intake Manifold and there is a knock sensor 1/ knock sensor 2 on this model,the 2 is the one in the rear.
where is the 05 cheverolet 2500hd knock sensor located 6.0 liter
No