It is very important to change PCV valve. If valve is old it will plug or seize. This will cause oil pressure to rise and may cause leaks. Most likely the valve cover gaskets will leak if PCV valve is plugged.
Yes, most definitely.
To change PVC valve on a 1993 Nissan 300zx, first remove the oil dip stick and remove the tension clip from the PVC valve hose. Then remove the hose and the old PVC valve. Replace with a new PVC valve.
It is at the top of the valve cover. Hope that heps!
In the valve body of the transmission.
* A heat riser valve
No
On a 1987 Nissan Hardbody Pickup, the PCV valve is located between the alternator and the oil filter. The valve can be seen when the oil filter has been removed.
where is the pcv valve located 1994 nissan pick up 4wd 2.4l
1995 nissan pickup has a expansion valve rather than a orfice tube and is located on the evap.
below the right side of carb.
if I knew the answert I wouldnt be here!!
In the ac box
The valves in a 2.4 L Engine Are not Adjustable
insid ac box at floor board.
in back of the alt you can fill it but can not see it take alt out of way to get to it
first its an egr valve and its between the exhaust manifold and the exhaust pipe itself usually on the passenger side
The expansion valve is located in front of the evaporator core. You must remove the housing to access it.