Want this question answered?
Using the correct procedures and filler material they can both have the same strength. P.S. both are considered "arc welding"
It is the rate at which the welding rod is melted and deposited on the work being welded
the root opening is the distance between joint members at the root of the weld before welding. the root opening must be accurate so that excess welding is not necessary.
Mesh
Arc length is the distance from the tip of the electrode to the workpiece.
The company Aerotech specializes in precision welding. The company uses a wide selection of welding equipment and specializes in full project production.
1/16 or an 1/8, usually an 1/8 and usually used in 6010 welding processes
In welding, the ratio of the strength of a joint to the strength of the base metal expressed in percent.----
Usually the rating of a welding machine is expressed on the DC output side. What you need to state is what the input in voltage and amperage is. It is this side of the welder that is connected to the supply breaker. On the nameplate there will be a voltage, amperage both stated for an AC supply connection.
It can be. Basic welding techniques can get you started in the welding field. Stick welding in the flat position for example. The more experience you get usually translates to more money. Certain processes take more skill such as TIG or plasma welding as well as pipe welding and underwater welding. These are considered highly skilled.
A two year welding degree will usually land someone a spot as a welding technician or a welder/welding operator. If there was any welding automation involved in the degree, a person with an Associate's degree can also be a robotic programmer/operator.
Welding technology is the study and application of the many processes of joining various metals. Welding Engineering is a far deeper study and application into the individual characteristics of each metal. A welding engineer will decide what metals are used in a project and what process to weld those metals. Weld techs will usually just receive blue prints and weld as instructed. Welding technology is usually a 2 year degree, and Welding Engineering is a 4+year degree.
Actually I usually crowd the puddle when welding vertical up. The longer the arc length the more the arc can wander.
If by gas welding you mean-oxyacetylene welding. The difference is just that arc welding requires a darker shade of lens. When oxyfuel gas welding (OFW) usually a shade 5 lens is recommended. When arc welding, a minimum of shade 10 lens should be used (actually shade should be determined by amount of current used).
Usually by bolting or welding them.
Steel is such a commonly used metal that almost any welding machine can accommodate it. Some are better than others though. Steel is usually welded with either sick welding, or wire welding (gas shielded or flux core)
Robots should do the jobs that humans don't want: the messy, boring, repetitive, or dangerous activities such as sewage cleaning, precision welding, and defusing bombs.