the kettle is made from iron. Matter passes through and that's why the water is the same temperature as the bottom of the kettle.
the kettle is made from iron. Matter passes through and that's why the water is the same temperature as the bottom of the kettle.
As water at the bottom is heated, it rises and cold water replaces it. That's heated and the cycle continues until all the water is at the same temperature.
Example sentence - I heated the water in the kettle to make tea.
The water which is hot rises to the top, and the cold water goes to the bottom to be heated. The heat transfers to the water, hence, making it hot. Then the hot water rises and the cold water goes down, then the heat transfers to the water and it carries on till all the water is fully heated.
The reason for this is because the hot water rises and as the cold water circulates to the bottom it gets heated and the cycle continues until the temperature is the same throughout the body of water or the power is turned off.
NO. Water vapour is created by heating water e.g. when you heat a kettle steam floats out of the top of the kettle, that's water vapour.
Kettles have an element at the bottom, which is heated up by the electric current connnected to it. As the current flows through the plug and the connection, the element becomes extremely hot and disperses the heat throughout the water, at this stage you see tiny bubbles rising from the element. After a minute or so, the water reaches boiling point, starts to agitate, and the steam comes out of the spout of the kettle. If you have a whistling kettle, this is when the steam is forced through a small hole, causing the whistling sound the kettle makes when the steam goes through it. Now you are ready to make that cup of tea.
water when heated in a kettle turns into steam
Steam. The reason for this is water boils at the temperature of 212 degrees F. Steam can be heated to much higher temperatures than that. Some engines that are water cooled has steam at temperatures of over 700 degrees. Water basically becomes a plasma at this temperature.
Actually, the water inside is heated mainly by conduction. A person nearby is heated by both convection and radiation.
Hi there when the kettle is boiled the water inside is heated up to boiling point.This is because the coil inside the kettle gets heated by electricity very rapidly and transfers the heat to the water making it boil. The coil some times get a build up of natural chemicals on it such as limescale and therefore has to be cleaned . Now a days we have filter kettles which get rid of the limescale as water is added to the kettle.
A kettle of water typically reaches a higher temperature than bath water, as kettles are designed to heat water quickly. The water in a bath is usually at a comfortable temperature for bathing, which is lower than the boiling point of water in a kettle.