To set the same IP Address to the Telnet server each time it connects to the network.
Most likely it means a range of IP addressed used for DHCP service.
The range reserved for DHCP cannot be used for other addressing such as static IPs.
To enable the router to provide the same IP address to the Telnet server each time it connects to the network. In short, to provide a reliable static IP to use for Telnetting purposes.
To enable the router to provide the same IP address to the Telnet server each time it connects to the network. In short, to provide a reliable static IP to use for Telnetting purposes.
router (config)# ip dhcp servicerouter (dhcp-config)# ip dhcp pool router (dhcp-config)# network
The ISR router acts as both a DHCP client and server.
DHCP
Turn off dhcp in router settings.
router(config)#ip dhcp pool pool nameRouter(dhcp-config)# network x.x.x.x y.y.y.yx being the networky being the subnetOther settings are available for configuration.
DHCP uses the clients MAC address to determine the IP address a client receives.
At the DHCP server, you would create an address reservation. To do so, you need to know the host's MAC address for its network interface.
integrated services router
Read the section of the manual concerning enabling the router to be a DHCP server. DHCP is the magic that assigns IP numbers.
The Integrated Router is both a DHCP client and a server (p 186 BMF)
Router is usually configured as a DHCP client for WAN (Internet) network and as a DHCP server for local network.