Voltage Tarnsformer transforms only voltage. While power transformer transforms both voltage and current.
because current is the ratio of voltage and resistance.
A parallel circuit has the same voltage but different current in each leg and series circuit has the same current but different voltage on each components unless the same value.
The phase angle between voltage and current in a purely resistive circuit is zero. Voltage and current are in phase with each other.
current flows as a result of potential difference i.e. in a circuit if there is no voltage difference between two points, no current can flow between those two points. So voltage has to be produced first.
In a capacitor ckt, current will be lead ahead from voltage by an angle 90 degree. Because for a capacitor the relationship between voltage and current is given as v=(jx)i , where v= voltage i= current jx=capacitive reactance
According to ohms law I=V/R; So current is directly proportional to voltage
The difference between a current control device and voltage controlled device is that for current controlled device, the current is constant and the voltage is variable while for a voltage controlled device, the voltage is constant and the current is variable.
To sense the current flow across the current transformers and to monitor the current ratings. In current transformers no voltage variations occurs. but in voltage transformers it is mainly used to increase or decrease the voltage value.
in ac circuits power,P=VICOS@ @ is the angle between voltage and current. in dc P=VI V is the voltage I is the current. Power (in Watts) is current (A) x voltage (V)
Voltage is simply electrical potential. You do not have to have current to have voltage, but you have to have both voltage and current in order to have power transfer.Voltage = joules per coulombCurrent = coulombs per secondWatts = Voltage times current = joules per secondAnswer'Voltage' is a synonym for 'potential difference', not potential. A potential difference exists between two points which are at different potentials due to an imbalance of their electrical charges.
The main Difference between Voltage and Current Feedback Amplifiers is in the sampled(Output) signals. In Voltage feedback the sampled signal is voltage (Vf=Beta*Vo) where Vo is the sampled signal and for current feedback it is current signal (Vf=Beta*Io).