0
What else can I help you with?
How do you know how and when to take off on a airplane?
each plane has a set take off speed , flap position and weight for take off
What are the parts of an aeroplane?
the main parts of an airplane is 1.the propeller without it it can't fly 2.rudder 3 right wing flap 4 left wing flap 5wing 6 landing gear 7landing wheels 8tail of the plane
How do hydraulics work in a flap of an airplane?
Hydraulics extends or retracts a hydraulic cylinder that pushes a lever on the flap, moving it.
What is a wind flap?
An airplane flap extends the wing area during take-off and landing, to give extra lift at low speed. This allows the airplane to take-off and land at reasonably low speeds (around 150mph for most jet airliners).
What is the landing speed of a boeing 747?
All commercial (heavy) aircraft have a range of landing speeds which vary according to landing weight and configuration (flap setting). The normal range for the 747 for various weights and flap settings is around 130 to 160 kts.
Are flap controls on an airplane hydraulic or pneumatic?
They are hydraulic. Most controls surfaces are hydraulic.
What is a good landing approach with a 747?
on an ils speeds set a landing speed would be around 145kts-150kts (166mph-172mph) depending on the landing flap setting selected - this is based on full flaps
What is an aircraft flap called?
An aircraft flap is simply called a "flap." Flaps are movable surfaces located on the wings of an aircraft. They are designed to change the shape and configuration of the wing during different phases of flight. By extending or retracting the flaps, pilots can adjust the lift and drag characteristics of the aircraft, allowing for changes in speed, angle of descent, and takeoff and landing capabilities. Flaps can be divided into several types, including: Plain Flaps: These are the simplest type of flaps, which extend straight down from the wing when deployed. Split Flaps: These flaps are divided into two sections, with the lower section extending downward and the upper section remaining in place. Slotted Flaps: Slotted flaps have a slot or gap between the wing and the flap, which helps to increase lift at lower speeds. Fowler Flaps: Fowler flaps extend backward and downward, increasing both the wing area and camber, which allows for greater lift generation. The specific type of flap used on an aircraft depends on its design and intended purpose. Flaps play a crucial role in controlling and maneuvering an aircraft, particularly during takeoff and landing.
Flap over the glottis during swallowing of food?
epiglottis
What is the difference between an aileron and a flap?
MY ANSWER: The aileron is on the far end of the wing while the flap is on the inside of the wing. now you might think that these 2 are similar but in ways they arent. The aileron help the plane to spin bank and tilt, while on the other hand the flap increases lift or decreases drag for take off and landing. Hope this helped :)
What are the secondary functions of flaps on wings of an airplane?
Increases camber:Pushes more air down Slotted flap: Energizes boundary layer Increase wing area: Increases air diverted Increase separation: Slows plane during decent BY:Bineet sharma
How do you open the fuel flap of a suzuki vitara?
To open the fuel flap of a Suzuki Vitara, locate the fuel flap lever inside the vehicle, typically found on the driver's side near the floor. Pull the lever to release the fuel flap. If your model does not have a lever, you can simply press on the fuel flap itself, and it should pop open. Always ensure you have the vehicle in the off position before refueling.
