shunt resistances are used to increase the range of ammetes and moreover it is praticularly then we have to low value shunt resistance.
Analog meters are dial movement. If your talking about extend meaning adjusting, there is a round knob on the meters side that will adjust meter full movement.
Shunt resistance use to ammeter range increase
Analog circuit continuous uses the time voltage and currents while digital circuits are sometimes called the on/off and high/low control of voltage in circuits.
Has hand instead of digital.
Digital Electronics deals with logic 1 and logic 0, where logic 1 is represented by one voltage and logic is represented by another voltage.(ie. it is a discrete representaiton of analog signals). The main advantage of digital signals over analog signal is that it is less prone to noise.
Digital (numeric)Analog (voltage or current)Discrete (individual switch/relay closures)Analog (frequency or phase)SerialAnalog (polyphase syncro or servo)etc. application specific classifications of input
In most cases it is a dual-slope integration ADC (analog to digital converter).
No its not possible.To transform a group of discrete number into a continuous analog voltage we need digital to analog converter.
analog Voltmeters come in both forms depending which one you buy.
0 is smallest primary voltage division
an analog signal
A voltage DC(direct current voltage) is a uni-direction steady voltage. It is the opposite of an analog/alternative voltage which varies in polarity and direction with time.
Well you can use Digital-Analog Converter to do the same operation.
Analog circuit continuous uses the time voltage and currents while digital circuits are sometimes called the on/off and high/low control of voltage in circuits.
Has hand instead of digital.
analog is a D'arsonal movement (an indicator needle over a scaled background) and a digital meter is a LCD display that has no movement
A to D converter... same regardless of voltage
The ideal Quantization error is 2^N/Analog Voltage
Analog television was first used in the 1930s. Analog signals are sent by varying voltage, radio frequencies, and static images.