It's important because it is the aircraft's means of getting lift and flying.
The wing spar. The spar is the main structure of the wing that supports the load of the entire airplane. All the loads go through the wing into the wing spar and down to the center of it, which is called the "wing box". (You could call this the most important part,)An airplane may fly without its engines. It might be able to fly without its flight controls. But it can not fly if the wing spar breaks.
What wing design for a paper airplane will soar the farthest
1905 was the first fixed wing airplane
The best wing shape for sn airplane is like a triangle because it fly straight
Yes because an airplane wing has to cut through wind and create loft and lift.
The air above an airplane wing in flight is at lower pressure than the air below the wing. Hope this helps.
It's the length of the wing. Depends on make.
No.
Monoplane
The lift on an airplane wing increases as the speed of the airplane increases due to the Bernoulli's principle. Faster airspeed over the wing creates lower pressure, and higher pressure underneath the wing generates lift. This relationship creates more lift force as airspeed increases.
If you are referring to the distance from wing tip to wing tip, it is usually called "wingspan".
It would be said that the Wright Brother invented the airplane wing. They were the first to fly a heavier than air craft.