My belief is that you should run it only enough to keep the pool floor clean. Some cleaners have flapping feet or other parts to make them move. Those tend to wear out faster than the ones with wheels, so I usually recommend they run only as needed (usually an hour or two per day) The pools that have wheeled cleaners I let the sweep run the whole time the pool is running. If you have a variable speed or two speed pump let the pump run at low speeds without the cleaner most of the time, then high speed for an hour or two with the cleaner on.
What about "sweep a new pool surface"?
To prevent your Polaris pool sweep from spraying nearby plants, you can adjust the water flow and angle of the sweep to minimize splashing. Ensure the sweep is properly calibrated for your pool size, as incorrect settings can cause excessive water movement. Additionally, consider using barriers or strategically placing planters to shield plants from any unintended spray. Regular maintenance of the pool sweep can also help maintain efficient operation and reduce water dispersion.
As long as the sun is up.
3 hrs
Long enough to turn over the full amount of water in the pool every 24 hours.
run, course, rush, sweep, move, pass, roll, flood, pour, sweep
most pools run somewhere between 6 and 8 hours. this can be changed depending on the season an the load that the pool gets in impurity's.
sweep it and put soap and water on a wash rag
Yes. The EE pair has a long E sound, as in sweet and keep.
The suction side cleaner - pool vac - may have air entrapped inside the housing. Inverting it while still under water may work.
This depends largely on how much use it gets or how much dust and impurity's are blown or dropped into the pool. if you have a salt water pool then you have to run it long enough to generate enough chlorine to keep the chlorine up. If it is an ordinary fresh water pool then usually some where between 6 and 8 hours per day on average.
Same thing consider the following Long turn ell ( Sweep) regular sweep and short sweep = 1/4 bend all are 90 degree fittings