0
What else can I help you with?
Do you add shock to the pool on top of the water?
Yes; mix the shock with water and pour it into the pool directly in several locations and run the filter.
How long after adding alkalinity to a pool can I add shock?
24 hrs
Intex pool with slime on the walls and floor?
I use the Intex pool startup kit. It has sanitizer, pool test strips and shock. Add Sanitize which is granular chlorine. If you have a pool brush, brush pool. I actually use a mop. If its really dirty you may have to get inside pool to mop, in which case add Sanitize after. Then run filter for 20 minutes and use test strip to check pH & alkilinity. If not right pH add another dose (booklet in kit says how much per 500 gals of water)and run filter another 20 min. Then add Shock and run filter 4-8hrs. If you don't have a filter, then you probably have to drain, clean with regular liquid bleach & mop then refill.
Can you add muriatic acid and pool shock?
Yes you can the muriati acid is used to get the pools pH to between 7.2 and 7.6 then you can add the pool shock as per the instructions.
How do you chemically clean the sand in a pool sand filter?
Here's a quick tip on chemically cleaning or killing the algae living in the sand in a sand filter. The next time you shock your swimming pool, poor the shock or bleach in the skimmer. This will provide a very high level of chlorine in the filter for a very short period of time. Long enough to kill the stubborn algae living in the filter but not long enough to hurt your plumbing.
How do you get the green out of your salt water pool?
go to your local dealer and purchase a bag of pool shock in one hour it will be clear again If your controller has a Shock or Super Chlorinate setting then put it in super chlorinate and run the filter. You should also add sone algeacide and maintain it.
When should you add shock to your pool?
You should add shock to your pool when the water needs a boost in sanitizing power, typically after heavy use or if the water appears cloudy or has a strong chlorine smell.
Can you shock pool at the same time you add other che?
yes
When do you add clearifier after shocking pool?
Yes you can add shock solution to your swimming pool after or at the same time as a clarifyer. You should not swim in your pool for at 4 hours after shocking it.
How do you shock a pool using muriatic acid?
You can't! Muriatic acid (~32% HCL) will not add any free chlorine to the pool and will not function as a oxidizer (Shock).
Do you still have to add shock each week with the salt systems?
Salt pools still require weekly shock maintenance, but not near the amount that a chlorine pool would need. There are Salt Pool Shock Treatments out there for your particular pool setup.
When do you add DE to a pool?
You add D.E. to a pool when you do a fresh filter clean. You also add D.E. if you have to backwash your pool more than normal. When you backwash the pool it is also dumping the D.E. out so it needs to be replaced to keep the grids covered so the pool can filter properly. Hope it helped
