The time it takes to replace a tie rod in a Buick varies with the age of the vehicle and whether this is an inner or outer tie rod. Estimated replacement time is 1 to 3 hours with a cost of about 230 dollars depending on the area and model.
The door hold open rod on a Buick Park Avenue can be replaced by unbolting one side of the rod while slipping the other out of the frame. It can then be lifted out and replaced with a new unit.
In order to replace the outer tie rod end on 1994 Buick, you should start by loosening the jam nut, then unscrew the tie rod end and then remove the cotter pin. Fit it the new tie rod end and screw back all the parts.Ê
TRY GOING TO THIS LINKhttp://www.ifitjams.com/tie_rod.htm it gives video instructions
1994 buick regal inner tie rod ends
remove the old one... install the new one... this ain't rocket science
one 30 minutes
Remove the old tie-rod from the knuckle. Loosen (or preferably replace) adjusting sleeve. Put on new tie rod and tighten everything down. Then take it and get it aligned.
replace the tie rod ends
The 1991 Buick 3.1 liter rod cap torque specification is 90 pounds. The rod bolts should be torqued in 45 pound intervals.
5hours30mins.
Take it to a garage as you need special tools and the alignment has to be set when you replace them.
Not long. Bout an hour to cand track rod ends and tie rods on both sides. Had t cut one off with a grinder though.