No pipe dope is to be used on the brass seats they will seat dry.
when joining to lengths of black steel it is necessary to use either Teflon tape or pipe dope, also called leak lock, this is not to seal the joint per say but the tape and doping act as a lubricant on the threads of the joint allowing for the pipe to be turned together tighter also the dope will dry and become a sealant
A PVC pipe glue will take at least 4 hours to dry. 12 hours before putting water pressure in it.
It depeds whatANS 2 -ABS pipe glue dries in about 25 min to half an hour, cures almost totally in 4 hours/
Start with one of the pipes you are connecting together. I usually start with the female half of the union. The half that has the nut on it. Slide the nut over the pipe first so you don't forget it. Use pipe dope or teflon tape on the threads of the pipe. Screw on the female half of the union and tighten it with two pipe wrenches, holding the pipe with one of them. Put the other half of the union on the second piece of pipe you are connecting and tighten it. Now bring the two halves of the union together and screw on the union nut. Do not put any pipe dope or tape on the union itself. It is a dry fit. Tighten the nut while holding the male half of the union. The second half of the union. -- I always put pipe dope on the union, it helps the union tighten more and it helps keep the threads from corroding together over time, making taking it appart easier.
With in 3-4 years, if you drive long periods of time you will get more time out of it because you will dry up the water in the pipe and it will not rust out as fast.
how long does roof cement to dry
how long does it take for bituman to dry outside
It takes about 30 minutes to dry !
well im thinking it will take 5 houres for water to dry on asphalt.
An hour
40 days