The ABS light will illuminate and the ABS function will not work if needed.
It will bolt in but the abs light will illuminate and the abs will not function.
Usually this indicates a problem with the anti-lock brake system. The brake system should still work (as long as the BRAKE light doesn't illuminate), however the brakes may lock up, since the ABS system may not be functioning correctly.
not standard, it was an option. If the vehicle has ABS, you will see an ABS light illuminate for a few seconds whenever the key is turned to the on position.
Pull the ABS fuse, unplug a wheel speed sensor, unplug the ABS computer. All of those options will cause the ABS light to illuminate in the cluster.
Yes, only under hard braking and the abs light would also illuminate.
Is it the parking brake light or the ABS light? is it red light or amber?
The ABS system self tests itself every time you turn on the ignition. If there is a fault the light will illuminate. Repair the fault and the ABS system will test itself and reset the light if everything is good.
The light should not stay on. The light is staying on because there is a problem with the ABS system. As long as the light is on the ABS system is not functioning. You need to have it checked out if you expect the ABS system to work when you need it.
The ABS light is on because there is a problem with the ABS. The light won't go out until the problem is fixed. As long as the ABS light is on the ABS will not function.
when you first turn the key on, the cluster should illuminate many lights. ABS should be one of them. Or you can look under the hood at the master cylinder and follow the brake lines to see if they go to the ABS actuator. No actuator=not ABS
The most common problem is the wheel bearing or the wiring harness has broken, a visual examination will find the broken wire, but a scan must be done to locate which bearing is at fault. The ABS module does a self check everytime the ignition is turned on. During the self check mode the ABS module has detected a problem with the ABS and the ABS light will illuminate until the problem is fixed. As long as the ABS light is on the ABS function is disabled. As already mentioned a scan must be done to help locate and repair the problem.