0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you set shutter speed for minutes or hours?
Most cameras don't have a dedicated shutter speed longer than thirty seconds. If you wish to take exposures longer than that, use the bulb function ('B' on most cameras). Bulb allows the shutter to stay open as long as the shutter button is held down. Get a locking cable release, switch camera to bulb, and you can take any length exposure you want.
How does shutter speed control the amount of light entering a camera?
The Shutter Speed. If the shutter speed is positioned at 2000 you'll have a very quick exposure, this is best used if its very bright outside. If the shutter speed is at 75, you'll have a very long exposure, best used if its cloudy or dark.
What is shutter speed in photography?
Shutter speed is how fast your shutter opens and closes to take a picture on your camera. Shutter speed also has a lot to do with exposure. The higher the shutter speed (1/2000 example) the less light.
What are the minimum values on the shutter speed scale in photography?
The minimum speed, i.e., the slowest the shutter will cycle, is B. The shutter will stay open for as long as the shutter release button is depressed. You can't get much slower than 'not moving'.
What is the lowest shutter speed you can set a camera?
It depends on what camera your using, some have it so that the shutter will stay open for seconds long. Some have a,"bulb" mode where the shutter stays open for the whole time you have the shutter-release button pressed.
Why does your camera take so long to take a picture?
It depends on the shutter speed, if its a "point and shoot" camera the speed is determined by the auto settings of the camera. For a DSLR cameras you can control it manually, average DSLR cameras can shoot up to 1/8000th of a second.
Can you slow the shutter speed on a canon powershot a3000 is?
Yes. To do this, you have to change the mode in SCN. Then, select the long shutter effect ( press the right button or the flash button ). it is located at the last. then, to change the shutter speed, press the up button or the exposure button. to adjust the speed, just press the left or right button. the shutter speed goes from 1-15 seconds only. I hope this is the answer to your question. Excuse me for my explanation coz I am not really good at it.
What does 12.5 mean on the shutter speed?
It depends on where you are seeing this number. Most shutter speed conventions do not use o1/12.5 of a second as a shutter speed; the closest would probably be 15 meaning 1/15th of a second, which is a very long/slow shutter speed usually producing blurs if you're not using a tripod. I can't think of a camera with that as a preset shutter speed but your camera might. You may possibly be looking at an intermediate f-stop (between 11 and 16) being reported on your screen or wherever these are shown (your LCD?) when you are in shutter priority mode where you are setting a fixed shutter speed and then the camera automatically adjusts for f stop (aperture) based on WB and ISO and is sophisticated enough to report an f-stop between 11 and 16).
How do you change the shutter speed and aperture on a canon digital ixus 85 IS camera?
You can set the Long Shutter speed. In Manual mode, select ±0 then Disp. You can scroll between 1" and 15". I think 1"3 means 1.3 seconds.
How does the film relate to the shutter speed?
The slower the film -- that is, the lower the ISO rating -- the longer the shutter must stay open at a particular aperture (F-stop). In low light with slow film, the shutter may have to stay open too long for the camera to be hand-held without noticeable camera shake, even with cameras with optical image stabilization.
What shutter speed setting allows the photographer to keep the shutter open indefinaltely?
Hello, not all cameras have this setting, but on SLR's the setting is called "BULB". This refers to the old cable release device which had an air filled plastic bulb on one end. When the bulb was pressed and held down, a little cable rod pushed down on the shutter release button. As long as you held the bulb, the shutter would stay open. The bulb was on a cable because the alternative was to press the shutter button with your finger, which might shake the camera and give you a blurred image. On modern cameras, you can probably use the bulb function in conjunction with the self-timer. Set your camera to bulb, turn the self timer on and press the shutter button. Your hands will be well away from the camera when the shutter opens, then just quickly press the shutter button again or turn off the bulb function when you have achieved your desired exposure. In film SLR's you have to watch out for fogging in the frame and the other frames immediately before and after with really long exposures, because light has a way of creeping around inside the camera if the shutter is left open too long. Use small apertures. Hope that's helpful. www.lords-stock-photography-emporium.co.uk
What are 3 things that controls exposure?
Shutter speed, aperture, and ISO are the three main factors that control exposure in photography. Shutter speed determines how long the sensor is exposed to light, aperture controls the amount of light entering the camera, and ISO adjusts the camera's sensitivity to light.
