Wiki User
โ 16y agoThere's no fixed answer to that, as it depends on type of bike, how hard the rider is trying and how fit (s)he is. I could do it in 20 minutes or so on my commuter bike, but I'm not 300 lbs. Around 30 minutes should be doable.
Wiki User
โ 16y agoYes, because as an bmx rider i aslo do trick ridding and we do need pedal brakes
The pedal shower or the Velo-douche was invented in 1897 in England. The device was a stationary bicycle that had a tube that pumped water on to the rider. There is no public record of who actually invented the pedal shower however.
The address of the Range Rider'S Museum is: I-94 W Main St, Miles City, MT 59301
what u talking about? a rider can ride a horse as long as he/she wants, until either the rider or horse dies...
The rider puts his feet on the pedal and push on the one that'd going down on the front side, which tensions the chain, which makes the rear wheel turn and the bike to move forward.
A bicycle carries kinetic energy when it is in motion. The kinetic energy comes from the rider's pedaling efforts and is stored in the motion of the bicycle and rider.
The total value of the frictional forces acting on the bike and its rider would be 400 N, which is equal in magnitude to the pedal force applied. This is necessary to balance the pedal force and maintain a constant speed when the bicycle is moving at a constant velocity.
If the rider pushes down on the forward side, the top run of the chain goes tight, the rear Wheel begins to turn and the bike starts to move forward.
A bicycle does not produce energy on its own; instead, it converts the rider's pedaling motion into mechanical energy to propel the bike forward. The energy required to pedal a bike comes from the rider's muscular effort.
it should be printed on the side wall of the tire Front 28psi Rear 30psi Add 2psi (32psi) if load is over 300lbs/ can reduce to 28psi if rider is under 150lbs
The phone number of the Range Rider'S Museum is: 406-232-6146.
Electric bikes, or e-bikes, are bicycles that have an electric motor that can assist the rider. There are two main types of e-bikes: pedal assist and throttle. Pedal assist e-bikes require the rider to pedal in order to activate the motor, while throttle e-bikes can be powered without pedaling by using a throttle mechanism on the handlebar. However, the level of assistance and the maximum speed of the motor are limited by law in many countries, and pedaling is often necessary for safe and legal operation. Therefore, electric bikes do involve pedaling, but the amount and difficulty of pedaling depend on the type of e-bike and the riderโs preference.