It depends on the rate at which you are consuming the gas.
That depends on how fast you are using it.
A cubic foot of Acetylene weighs .06734 lbs.
Industrial gases like argon aren't sold by the gram, they're sold by the cubic foot at 2500psi. Last time I priced it, it was about $1.50 per cubic foot if you bought a 40-cf tank.
There are an infinite number of square feet in a cubic foot. This is because a square foot defines a 2D plane, and 2D objects have no depth. They are infinitely thin and therefore there would be an infinite number of square feet in a cubic foot. Square feet have dimensions L2 while cubic feet have dimensions L3 so they are not interchangeable. If volume units could be converted to area units, then you'd be able to figure out how many acres of gas your car burned last month, and you could go to the store and buy the equivalent of 2 square feet of milk.
This question is incomplete as the last part has been omitted.
in texas is about 5 dollars per cubic foot plus labor last time i did it it was it was 600 dollar for a 30 feet long 12in width and 12in deep footing.
An inch is a measure of length. A cubic foot is a measure of volume or capacity.If the question refers to how many cubic inches in 1.7 cubic feet, then :12 inches = 1 foot12 x 12 = 144 square inches = 1 square foot12 x 12 x 12 = 1728 cubic inches = 1 cubic foot.1.7 cu feet = 1.7 x 1728 = 2937.6 cubic inches.
A linear unit is used to measure length or distance whereas a cubic unit is used to measure volumes. A cubic unit may defined as a cubic measure (eg a litre) or it could be composed of three linear units (eg cubic centimetre), or a square unit and a linear one (acre-foot). This last combination is rare in the SI system because the linear units are more easily linked to square and cubic units.
The volume of a cylinder is a product of its length, the square of its radius, and the irrational number pi. The radius is half the diameter, so that the volume of this cylinder in cubic feet is (4)(0.5)2(pi) = about 3.14 cubic feet. There are 27 cubic feet per cubic yard, so that this equals 3.14/27 = about 0.12 cubic yard, where the last digit is depressed because it may not be significant -- there is only a single significant digit given for the dimensions of the cylinder.
The cubic root of 100 is about 4.642, so the first such perfect cube would be 5. The cubic root of a million is 100, so the last such perfect cube would be 100 (or 99, if you don't want to include the endpoints).
Eugene Cernan and Harrison schmitt were the last men to set foot on the moon
There is no LAST natural number. According to Peano's axioms for numbers, every natural number has a successor.
Yes, it is called a Last.