0
Add Resins
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What are the ingredients to make bubble gum?
Corn syrup, rubber, artificial flavor
What did the Caddo Indians make clothes out of?
they made their clothes out of cloths and something sticky then let it dry to wear it
How do you make rubber?
The simplest homemade rubber is made by bringing milk to the boil in a pan, Then adding a few drops of vinegar And then simply pour into a mold and leave to harden for about 1 hour
How do you write a good manifesto as a compound overseer overseer?
what will be your work if u are a copound overseer
Was rubber rationed in World War 2?
Yes. Rubber was a very important war material, for tires and other uses by the military forces. People would take their tires off their cars and line the inside with newspaper to make them last longer.
How do you make rubber less sticky?
cool it off
How do you make gum sticky?
It has sap in it. and it is high in sugar. also the base is esstianlly rubber.
What is the name of the polymer made from butene?
Butadiene is a non-corrosive gas that condenses to a liquid and is used to make polymers. Butadiene polymers include neoprene, styrene-butadiene rubber, and nitrile rubber.
What is the process of extracting rubber from rubber tree?
Make an incision around the tree trunk and collect the white sticky sap which falls from the cracks in a bucket.
What kind of rubber to make elastic band?
Vulcanised rubber, which is also used in tyres. This rubber is mixed with sulphur compound to heighten strength and durability.
How do you make rubber in tekkit?
Either collect sticky resin by placing a treetap on a rubber tree, or harvest logs from the rubber tree. Just place either of those in an extractor (it must be powered though).
What is valcunisation?
I am guessing that you really mean Vulcanization? This is the process, using HEAT, that processes Raw Rubber into a Hard non-sticky rubber. This is the process that is used to heat treat rubber in Molds to make Tires.
What makes tape sticky?
some type of rubber glue is mixed together with a clear non sticky strip and is formed into tape with one side sticky and the other not
How do you make sticky rubber?
Well, if you really just want it to be sticky, you could pour honey on it. If you want to stick it to something specific, you could try double-sided tape, or many types of glue.
For what the rubber is used to make?
Rubber is made from many kinds of products. Rubber is made up of polymers, organic compound isoprene, minor impurities of other organic compounds and water.
How do you make sticky rubber normal?
baby powder. Once the rubber deteriorates, there is no satisfactory method to "cure" it, except to have the component replaced. The following, however, are some suggestions that are commonly put forward: 1. Strip away the rubber coating altogether, if you can live with that! Some have reported success in using alcohol to strip away the rubber, taking care not to damage the surfaces on surrounding components. Or simply peel it off bit by bit. 2. Use talc or baby powder to apply to the sticky surface (Caution: this will not work for long! And don't use on cameras with sticky rubber backs--the powder will get into the camera and spoil it). 3. Use diluted ammonia or Windex to wipe the sticky surface away (but result is not permanent). 4. Check those who sell supplies for rubber boats, and get a special paint that will coat over the rubber to treat it. 5. I had success using a little paint thinner to remove the stickiness on some rubber cables. The thinner is applied onto a cloth and using it to rub on the sticky surface until the stickiness is gone. The stickiness, I suspect, was due to contact with masking tape, which reacts with the rubber after being on it for a long time. This was the most successful experience with treating sticky rubber surfaces thus far.
What is put on the bow to make is sticky?
Sticky glue
