0
What else can I help you with?
Can you use an inverter on a 1500 watt sodium bulb?
You can as long as the rating of the inverter supports the 1500 watt power requirement at the operational voltage of the bulb. There may be a surge at start-up of the bulb so that has to be taken into account.
What load can 1500watts inverter drive?
A 1500-watt inverter can drive devices that collectively require up to 1500 watts of power. This includes appliances like small refrigerators, microwaves, and power tools, as long as their starting wattage does not exceed the inverter's capacity. It's essential to consider the surge wattage for devices with motors, which can be significantly higher than their running wattage. Always check the specific power requirements of the devices you intend to use to ensure compatibility with the inverter.
Brake light failure 2005 Chevy 1500?
Check the fuses, Check the bulbs, Check the brake light switch, In that order.
What power inverter do you need for a kettle?
To power a kettle, you typically need a power inverter that can handle at least 1000 watts, as most electric kettles require between 800 to 1500 watts to operate efficiently. It's important to choose a pure sine wave inverter for sensitive electronics and to ensure it has a surge capacity to handle the initial power spike when the kettle is turned on. Always check the kettle's wattage rating before making a final decision on the inverter.
How do you change brake light bulbs on a 2005 GMC Sierra 1500?
There are two screws in the tailgait jamb, just remove them and the lense comes right out exposing the bulbs.
How do you change the left running light on a 2002 silverado 1500?
Remove the headlight assembly to gain access to the bulbs.
Can you use a 350 watt inverter to power vacuum cleaner?
It depends on the vacuum cleaner's power requirements. Most vacuum cleaners consume between 500 to 1500 watts, which exceeds the 350-watt capacity of the inverter. If the vacuum cleaner's wattage is below 350 watts, it might work, but it's essential to check the specific model's specifications to avoid damage to both the inverter and the appliance. Always ensure that the inverter's continuous and peak power ratings are sufficient for the device being powered.
2005 Dodge ram 1500 pick up why is the Lamp Out light on the dashboard on?
One or more headlight/taillight bulbs are inoperative.
If 2000 ram van 1500 has no reverse lights having good bulbs andfuse then where do you check next?
Reverse light switch.
Why would one brake light and one reverse light not work on a 2002 dodge ram 1500?
most likely ground wire problem Bad bulbs?
How do you power a 1500 watt AC appliance in a car?
You can buy an "inverter." It plugs into the cigarette lighter or accessory plug or directly clips to the battery terminals and converts the 12 volt DC to AC. You can then plug your appliance into it. Be sure to get an inverter that is the right wattage capacity for your device.
If a power saw is 12volts will a 400 watt inverter be sufficient?
No. The 12volts will not make a difference. The inverter converts the 12volts to 110/115volts. A 400watt inverter is not sufficient to run a power saw or any heavy power equipment like that. Laptops consume 20-50watts, while a coffee pot would consume more like 200-400watts. Your power equipment is a much heavier load, between 1000-4000watts depending on if it is a power saw or something larger. A basic 7 1/4 circular saw will use anywhere from 1000-2500 watts on starting and will draw a constant 800-1500 watts. Keep in mind it will draw more as you put it under load of cutting something, this will not run on a 400 watt inverter, let alone an 800 or 1000watt. You could however possibly run a power drill on that inverter, but otherwise no luck.
