A fuse is a safety device which is designed to blow (fuse) if a larger current than it is rated for passes through it. So a 10 amp fuse can pass anything up to 10 amps.
An amp fuse does not have a specific resistance in ohms. The resistance of a fuse is very low, usually in the milliohm range, and is designed to blow (open) when the current exceeds a certain threshold to protect the circuit.
The standard color coding for fuses in American wire is as follows: 15-amp fuse: blue 20-amp fuse: yellow 30-amp fuse: green
Yes you can but you are setting yourself up for a big problem. There is a reason the 20 amp fuse is blowing. By installing a bigger fuse it allows the current that is causing the 20 amp fuse to blow to stay in for a longer period of time. This can cause excessive heating and melting of the wires on the circuit that is blowing on a 20 amp fuse. Trace the wire and find the fault. Always use the manufacturer's recommended fuse sizing for your own protection.
It is not recommended to replace a 30 amp fuse with a 25 amp fuse in a central AC unit. The fuse should match the specified amperage requirements to prevent damage or overheating of the unit. Using a lower amp fuse could potentially lead to electrical issues or failure of the AC unit.
No, a 700 amp fuse would not be suitable for a 500 amp circuit. The fuse amperage rating should be equal to or slightly higher than the circuit's maximum amperage to provide proper protection. In this case, a 500 amp fuse or slightly higher would be the appropriate choice.
fuse number 1 is 10 amp fuse 2 is 25 amp fuse 3is 25 amp fuse 4 is a spare fuse 5 is 10 amp fuse 6 is a spare fuse 7 is 20 amp fuse 8 is 25 amp fuse 9 is 20 amp fuse 10 is 5 amp fuse 11 is 5 amp fuse 12 is a spare fuse 13 is 5 amp fuse 14 is 15 amp
1 amp
NO! Using a larger amp fuse defeats the purpose of the fuse to protect the wiring in the circuit. This can cause a fire. Always use the correct amp fuse for that circuit.
NO! Using a larger amp fuse defeats the purpose of the fuse to protect the wiring in the circuit. This can cause a fire. Always use the correct amp fuse for that circuit.
no you can't
absolutely not
15 is the amp pf the cigarette lighter fuse in Astra envoy.
The 1965 Chevrolet Impala SS fuse box requires a 20 amp fuse for the taillights. A 30 amp fuse can be used when a 20 amp fuse is not available.
20 amp body fuse 20 amp body fuse #15 on the fuse block 25 amp body feed fuse
This is a unclear question, and not easy to answer. In your fuse panal, their will be a range of fuses, from 5 amp, up to 30 amp. On your fuse panal cover, should be a digram of your fuse panal, and which amp fuse goes into which slot.
the amp wont work.Check the power fuse first.If this is ok, there is generally another fuse inside the amp that will need checking
Install the fuse that is required for the circuit.