Want this question answered?
about 3 or 4
53000Amps
It depends on the motor. The motor determines the amperage. Should be written on the well pump itself.
3 HP is 3x746 watts, it doesn't matter about the voltage, it could be anything.
It depends on the size and type of the motor being started.
about 3 or 4
53000Amps
That depends entirely upon the type of motor. A car starting motor may take a few hundred Amps for the short period.
23
To answer this question the voltage of the motor must be stated.
Depends on how big the motor is. A stronger motor will draw more amps then a weaker or less efficient motor. For example a wiper motor draws far less then a starter motor.
I have a single phase induction motor. It draws 8 amps on start up and climbs to 14-15 amps when I put a load on it. When I don't have a load it runs at 1 and climbs to 2-3 amps. It is normal operation for this motor to run at the lower number of amps with a load. But I don't know what is wrong.
Depends on the voltage.
Watts = Volts times Amps. Therefore, if the voltage was 220 volts, the motor would draw 500 amps. If the voltage was 4,000 volts, the motor would draw 27.5 amps. The voltages for large powerful motors tend to be relatively high, for example in the 380 Volts to 11,500 Volts range.
22 kw motor how much takes ampares with load
Need to know the voltage of the motor.
The blower motor is drawing to many amps, replace the blower motor.