Watts = Volts times Amps. Therefore, if the voltage was 220 volts, the motor would draw 500 amps. If the voltage was 4,000 volts, the motor would draw 27.5 amps. The voltages for large powerful motors tend to be relatively high, for example in the
380 Volts to 11,500 Volts range.
That depends entirely upon the type of motor. A car starting motor may take a few hundred Amps for the short period.
23
The amperage of a motor is governed by the voltage that the motor operates on. Without a voltage given, an answer can not be given.
T430.247 of the NEC shows that a 1 hp motor operating at full load on 115v will draw 16 amps, called Full Load Current (FLC). Conductors supplying this motor are required to be 125% of FLC which is 20 amps. Motor circuits are complicated things and do not follow the rules of other circuits. This motor, while drawing a maximum of 16 amps at full load and supplied with #12 AWG copper conductors can be protected by a breaker of 40 amps.
The electrical code states that a 30 HP induction motor at 460 volts three phase will draw 40 amps. <<>> I = 33.34 AMPS IF EFF.= 95% AND P.F.= 85%
depends on voltage.... 120volt = 8.33 amps , 240volt = 4.17 amps
The formula you are looking for is I = W/E. Amps = Watts/Volts.
about 3 or 4
53000Amps
That depends entirely upon the type of motor. A car starting motor may take a few hundred Amps for the short period.
23
To answer this question the voltage of the motor must be stated.
Depends on how big the motor is. A stronger motor will draw more amps then a weaker or less efficient motor. For example a wiper motor draws far less then a starter motor.
I have a single phase induction motor. It draws 8 amps on start up and climbs to 14-15 amps when I put a load on it. When I don't have a load it runs at 1 and climbs to 2-3 amps. It is normal operation for this motor to run at the lower number of amps with a load. But I don't know what is wrong.
Amount of electric current flowing through the vacuum. Watts: Amps multiplied by the power voltage drawn. Most upright cleaners are 7 to 12 amps. Many canister models are 12 amps. The maximum allowable amps that can be plugged into a household outlet is 12 amps.
Depends on the voltage.
22 kw motor how much takes ampares with load