0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many amps does a garage door motor use?
about 3 or 4
18kW motor will take how many amps?
53000Amps
How many amps does line 6 have?
Line 6 specialize in modeling amplifiers, software that is used for recording and digital modelling for guitars. There are 6 guitar amps made by Line 6.
How many amps are needed for a 220V well?
It depends on the motor. The motor determines the amperage. Should be written on the well pump itself.
How many amps should a starter draw?
It depends on the size and type of the motor being started.
How many amps does a 30HP motor use hooked to 480v 3 pH 60Hz line?
The electrical code states that a 30 HP induction motor at 460 volts three phase will draw 40 amps. <<>> I = 33.34 AMPS IF EFF.= 95% AND P.F.= 85%
How many amps does a garage door motor use?
about 3 or 4
18kW motor will take how many amps?
53000Amps
How many amps are in a twelve volt motor?
That depends entirely upon the type of motor. A car starting motor may take a few hundred Amps for the short period.
How many amps will a 75KW 525v motor draw?
23
How many amps will 8 d batteries generate?
Depends on the load, and on how the cells are hooked up, series or parallell.
How many amps in four C batteries in series?
C batteries use 1.5 volts. The number of amps depends on what device it is hooked up to. An average for four C batteries would be about 16 amps.
How many amps does a 15 hp motor draw?
To answer this question the voltage of the motor must be stated.
How many amps will a 24 volt dc motor draw if running at 12 volts?
Depends on how big the motor is. A stronger motor will draw more amps then a weaker or less efficient motor. For example a wiper motor draws far less then a starter motor.
1997 Neon How many amps is the cigarette lighter plug rated for?
Check the fuse that the cigarrete lighter is hooked up to.
Why is my single phase induction motor drawing to many amps?
I have a single phase induction motor. It draws 8 amps on start up and climbs to 14-15 amps when I put a load on it. When I don't have a load it runs at 1 and climbs to 2-3 amps. It is normal operation for this motor to run at the lower number of amps with a load. But I don't know what is wrong.
How many amps will a 120 kw dc motor require?
Depends on the voltage.
