Want this question answered?
Depends on the waatage of the immersion heater. Read the name plate details of the heater - it shows the wattage of the heater. Assuming the wattage is 1KW (1000Watt) the KHW will be 1KHW if you use the heater for 1 hour.
A typical domestic water heater uses 3 kW. On a European 230 v system it would use 13 amps.
If you mean an immersion heater for making hot water, they use 3 kW usually so you get enough for a bath in about two hours.
The electric heater will have power rated in Watts. The Amps it will draw depends on the voltage system you are using. Can be calculated by formula I (Amps) = P / V In the USA with 110V system a 2400W heater will draw 2400 Watts / 110 Volts = 21.8 Amps In Australia with a 230 V system a 2400W heater will draw 2400 Watts / 230 Volts = 10.4 Amps
There are zero amps in 1000 watts. Watts are the product of amps x volts or I = W/E, watts divided by voltage. As you can see, that if no voltage is stated no amperage can be given. Once you find the voltage of the heater then use the following equation, Amps = Watts/Volts to find the current draw of the 1000 watt heater.
Depends on the waatage of the immersion heater. Read the name plate details of the heater - it shows the wattage of the heater. Assuming the wattage is 1KW (1000Watt) the KHW will be 1KHW if you use the heater for 1 hour.
No it is not expensive
An immersion heater is used to heat water for purposes such as bathing or showering. The amount of hot water produced depends on how long the heater is switched on for.
First you need to find out how many amps the heater draws. Then use this formula: Volts (220) X Amps = Watts Then take: Watts x 3.41214 = Btu/hr
Find the block heater and look for the nameplate on it. It will be in watts. Use the following equation to find the amperage that it draws. Amps = Watts/Volts. The voltage to use for the truck will be 12 volts.
It uses 1150 watts, or 10 amps.
The formula you are looking for is I = E/R. Amps = Volts/Resistance.
A typical domestic water heater uses 3 kW. On a European 230 v system it would use 13 amps.
If you mean an immersion heater for making hot water, they use 3 kW usually so you get enough for a bath in about two hours.
The electric heater will have power rated in Watts. The Amps it will draw depends on the voltage system you are using. Can be calculated by formula I (Amps) = P / V In the USA with 110V system a 2400W heater will draw 2400 Watts / 110 Volts = 21.8 Amps In Australia with a 230 V system a 2400W heater will draw 2400 Watts / 230 Volts = 10.4 Amps
There are zero amps in 1000 watts. Watts are the product of amps x volts or I = W/E, watts divided by voltage. As you can see, that if no voltage is stated no amperage can be given. Once you find the voltage of the heater then use the following equation, Amps = Watts/Volts to find the current draw of the 1000 watt heater.
10 amps