0
What else can I help you with?
How many amps will a 3 phase 480 volt 4kw heater draw?
To calculate the amperage drawn by the heater, you can use the formula: Amperage (A) = Power (W) / (Voltage (V) * Square root of 3). In this case, the amperage drawn will be approximately 5.8 Amps.
What is the amp draw for a 3800 watt 240 volt water heater?
To calculate the amp draw for a 3800-watt water heater at 240 volts, use the formula: Amps = Watts / Volts. Thus, the amp draw would be 3800 watts / 240 volts, which equals approximately 15.83 amps. Therefore, the water heater draws about 16 amps.
How many amps does a 240 volt 1500 watt electric base board heater use?
To calculate the amperage for a 240-volt, 1500-watt electric baseboard heater, you can use the formula: Amps = Watts / Volts. For this heater, it would be 1500 watts / 240 volts, which equals 6.25 amps. Therefore, the heater uses approximately 6.25 amps.
How many amps does an imMersion heater use?
The current draw of an immersion heater typically depends on its wattage and the voltage of the electrical supply. For example, a 3000-watt immersion heater connected to a 230-volt supply would use approximately 13 amps (calculated using the formula: Amps = Watts/Volts). Always check the specifications of the specific heater for accurate ratings, as sizes and power ratings can vary.
How many amp will a 3 phase 208 volt 10.6 kw heater draw?
To calculate the current (in amps) drawn by a 3-phase heater, you can use the formula: [ \text{Current (I)} = \frac{\text{Power (P)}}{\sqrt{3} \times \text{Voltage (V)}} ] For a 10.6 kW heater at 208 volts, the calculation would be: [ I = \frac{10,600 , \text{W}}{\sqrt{3} \times 208 , \text{V}} \approx 27.8 , \text{amps} ] Thus, the heater will draw approximately 27.8 amps.
If a heater claims to be 1500 watts how long would it take for that heater to draw 1500 watts?
Watts is the amount of power the heater has and amps would be the draw- if it is a 120 volt heater than the amps would be 12.5 amps and it is instantaneous
A 2000 watt heater connected to a 120 volt circuit will draw a current of?
Current (amps)=Watts/Volts =2000/120 =16.75 =16.75 amps
How many amps will a 3 phase 480 volt 4kw heater draw?
To calculate the amperage drawn by the heater, you can use the formula: Amperage (A) = Power (W) / (Voltage (V) * Square root of 3). In this case, the amperage drawn will be approximately 5.8 Amps.
What is the amp draw for a 3800 watt 240 volt water heater?
To calculate the amp draw for a 3800-watt water heater at 240 volts, use the formula: Amps = Watts / Volts. Thus, the amp draw would be 3800 watts / 240 volts, which equals approximately 15.83 amps. Therefore, the water heater draws about 16 amps.
How many amps does a 120 volt AC 8 watt led bulb draw?
It is drawing .06 amps.
How many amps does a 240 volt 1500 watt electric base board heater use?
To calculate the amperage for a 240-volt, 1500-watt electric baseboard heater, you can use the formula: Amps = Watts / Volts. For this heater, it would be 1500 watts / 240 volts, which equals 6.25 amps. Therefore, the heater uses approximately 6.25 amps.
How many amps do you need if you have a 480 volt space heater?
The heater should have a wattage rating (very few list amps). Calculate the amps using the wattage and voltage. Amps = Watts/Volts(480).
How many amps does a fan heater pull?
The amperage a fan heater pulls typically ranges from 5 to 15 amps, depending on its wattage and design. For example, a standard 1500-watt fan heater operating on a 120-volt circuit will draw about 12.5 amps. It's essential to check the specific heater's ratings for accurate information. Always ensure that the electrical circuit can handle the heater's amperage to prevent overloads.
How many amps does a 3000w inverter 240 v draw from a 12 volt system?
It would be at least 250 amps, maybe 300 amps.
How many amps would a 15watt radio draw in the transmit mode with 12 volt being supplied to the radio?
1.25 amps
How many amps does a 12 volt light draw?
Have to know the wattage or resistance of the lamp to answer this question.
How many amps does an imMersion heater use?
The current draw of an immersion heater typically depends on its wattage and the voltage of the electrical supply. For example, a 3000-watt immersion heater connected to a 230-volt supply would use approximately 13 amps (calculated using the formula: Amps = Watts/Volts). Always check the specifications of the specific heater for accurate ratings, as sizes and power ratings can vary.
