0.27 a
Look at the back of your fridge and find the plate that tells you how many amps it needs. Once you have Amps you multiply that number by the Volts coming out of your plug (usually 120v) and you will get Watts. So once more: Amps x Volts = Watts
Depends on what refrigerator you are interested in. They all have a label somewhere, usually in the refrigerator compartment that lists the current. My refrigerator has a rating of 11.6 Amps. This is not a consistent current, but would be when the compressor is running.
That depends on the current draw of the compressor... Look for the stamped metal plate that has the model #. It should tell you the basics.Remember the electrical formula:Volts * Amps = Watts.
The terminal strip's rating is 15 amps at 600 volts. It does not matter what the voltage is up to 600 volts, the maximum amperage allowed on the strip is 15 amps. It could be 15 amps at 12 volts or 15 amps at 600 volts or any voltage in between.
0.27 a
How many Amps is the fridge pulling? Multiply the Amps by the 120V circuit you're plugging into and you'll get your Watts.
Look at the back of your fridge and find the plate that tells you how many amps it needs. Once you have Amps you multiply that number by the Volts coming out of your plug (usually 120v) and you will get Watts. So once more: Amps x Volts = Watts
Yes, as long as the bar fridge wattage is less than 650 W
I have read it can be ran off an 100watt solar panel. It uses .7-3.3 amps.
Depends on what refrigerator you are interested in. They all have a label somewhere, usually in the refrigerator compartment that lists the current. My refrigerator has a rating of 11.6 Amps. This is not a consistent current, but would be when the compressor is running.
Depending on size of Fridge. But AVERAGE is 12 volts for fridge, circuit necessity 15 amps 15 amps X 120 Volts=1800 watts minimum...I'm LEARNING myself
Wattage of a Sanyo Bar Fridge ,please?
The number of watts measures the power, and Ohm's laws requires us to know the current as well as the voltage to determine the power.P = i x eFor example, if the fridge draws 10 amps at 115 volts, the power is 1150 watts.AnswerThe answer is that it depends on the fridge. Look at the nameplate information for your particular fridge; that's where you will find your answer.
That depends on the current draw of the compressor... Look for the stamped metal plate that has the model #. It should tell you the basics.Remember the electrical formula:Volts * Amps = Watts.
The terminal strip's rating is 15 amps at 600 volts. It does not matter what the voltage is up to 600 volts, the maximum amperage allowed on the strip is 15 amps. It could be 15 amps at 12 volts or 15 amps at 600 volts or any voltage in between.
The watts or amperage should be stated on the nameplate of the fridge. If you are trying to find the size of a wire needed to connect the fridge to the electrical system an amperage needs to be calculated. If the watts of the fridge are known use this formula to find Amps = Watts/Voltage. Once the fridge's amperage is known, a correct wire size can be chosen and the proper fusing to protect the wiring put in place.