This is 220 volts AC, I assume. 10 x 220 = 2.2kVA of power. The real power will depend on the power factor. Take the power factor times 2,200 to find the watts.
That depends on circuit voltage.
1 watt is equal to 1 volt times 1 amp.
Watts = Volts x Amps x Power Factor.
Power Factor is 1 for resistive loads and decreases toward zero for inductive loads like motors.
2200
4 volts and how many amps? Watts = amps x volts. It depends on the amount of current (in Amps) flowing at 4 Volts... See Ohms Law: Watts = Volts x Amps If you have 2 Amps flowing at 4 Volts you are dissipating/consuming 8 Watts. If you have 10 Amps flowing at 4 Volts you are dissipating/consuming 40 Watts.
That depends on circuit voltage. 1 watt is equal to 1 volt times 1 amp.
The same number as 250 oranges is apples. A watt is a volt times an ampere.
W = A x V. Watts = Amps x Volts. There is not a voltage stated to multiply the 6 amps with so an answer can not be given.
Watts is the product of amps x volts. To give an answer the amperage needs to be given.
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
Watts/volts = amps3000 / 220 = 13.6363 Approximately.
you will need 21.81 amps at 220v
First you need to find out how many amps the heater draws. Then use this formula: Volts (220) X Amps = Watts Then take: Watts x 3.41214 = Btu/hr
The formula you are looking for is I = W/E. Amps = Watts/Volts.
The formula you are looking for is I = W/E. Amps = Watts/Volts.
Watts = volts x amps x power factor Power Factor is 1 for resistive loads and decreases for other loads like motors. Maximum watts would be 12 x 220
The equation that you are looking for is I = W/E. Amps = Watts / Volts.
If you are asking about 220 watts, remember Watts equal power, which is Volts times Amps. Amps are used to measure current - how many electrons flow past a certain point per second - so there is no answer to this question. If you meant to ask what current a load of 220 Watts would take if the applied voltage was 110 Volts, the answer is 220 Watts divided by 110 Volts = 2 Amps.
This depends on the voltage ... amps = watts / volts 660 W / 110 V = 6 amps 660 W / 220 V = 3 amps 660 W / 330 KV = 2 mA
You cannot convert 2.6 kw to amps with that information only. In order to convert watts to amps, you also need to know either current or voltage. This is because watts is volts times amps, and volts is current times resistance
The formula you are looking for is I = W/E. Amps = Watts/Volts.