0
100 KW divided by 415 volts is 241 amperes.
Power = voltage times current, so current = power divided by voltage.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How many amps will a 3 phase 480 volt 4kw heater draw?
8,33 Amps
How many amps does a 10kw heater draw that's 3phase 220volt?
40 amps
How many amps does a block heater draw?
To answer this question the wattage of the block heater must be stated. Amps = Watts/Volts.
How many amps does 30KW strip heater draw at 208 volts 3PH?
Assuming it is a 208-volt line voltage (as normal in 3-phase) the phase voltage is that divided by sqrt(3), or 120 volts. Each phase has to supply 10 kW so the current on each phase is 83.3 amps.
How many amps does a 208 volt 3 phase 45 kw hot water heater draw?
45000 / 208 /sqrt(3) = 125A per phase this is probably called a boiler unless it has a 2000Gallon tank
How many amps will a 3 phase 480 volt 4kw heater draw?
8,33 Amps
How many amps does a 1 phase heater draw if it run on 8kw?
To answer this question the voltage of the heater must be given. I = W/E.
How many amps does a 2000 watt heater draw at 240 volts on each line?
For a single phase circuit, the equation you are looking for is I = W/E. Amps = Watts/Volts.
How many amps does a 10kw heater draw that's 3phase 220volt?
40 amps
How many amps does a block heater draw?
To answer this question the wattage of the block heater must be stated. Amps = Watts/Volts.
How many amps does 30KW strip heater draw at 208 volts 3PH?
Assuming it is a 208-volt line voltage (as normal in 3-phase) the phase voltage is that divided by sqrt(3), or 120 volts. Each phase has to supply 10 kW so the current on each phase is 83.3 amps.
How many amps does a 208 volt 3 phase 45 kw hot water heater draw?
45000 / 208 /sqrt(3) = 125A per phase this is probably called a boiler unless it has a 2000Gallon tank
How many amps does a 50 gallon water heater with 2-4500 watt elements draw?
30
How many amperes use an electric heater?
The electric heater will have power rated in Watts. The Amps it will draw depends on the voltage system you are using. Can be calculated by formula I (Amps) = P / V In the USA with 110V system a 2400W heater will draw 2400 Watts / 110 Volts = 21.8 Amps In Australia with a 230 V system a 2400W heater will draw 2400 Watts / 230 Volts = 10.4 Amps
How many amps will a 400 watt heater cartrige draw at 240 volts?
The formula you are looking for is I = W/E.
How many watts is 1 hp at 480volts?
A 1-HP motor is reckoned to draw 7 amps at 240 v single-phase. The same power of motor would draw 3.5 amps at 480 v single-phase, but a 480 v supply could most likely be a three-phase suppy, and the current in that case would be reckoned as 2 amps.
How many amps on 3 phase 225 amp panelboard each phase?
It means 225 amps on each phase.
