0
Depends on the application, could be 2,3,4,5,6 etc.
If you ask a new question and include year, make, model, and engine size you will get a better answer.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How many bolts hold on an alternator for a 2000 Ford Focus?
2
How many bolts hold on an alternator on a 2001 Chrysler Town and Country?
Three.
What size bolts hold the alternator on a 1998 regal 2.8?
Dime sized bolts.
Where are the bolts that hold the alternator on the car located?
Depends on the car. Usually, they are right on the bracket that holds the alternator in place.
How do you replace the alternator in a 87 Trans Am?
take the belt off the alternator and take out the 3 bolts that hold the alternator to the engine and unplug the wires that plug into it and you have it off.
How do you remove the alernator from a 1997 Eldorado?
loosen the tentioner on the alternator. This will disattach it from the pulley. Then simply remove the bolts that hold the alternator to the block.
How do you replace Chevy Cavalier alternator?
Remove the bolt on the lower front side and two more bolts on the rear of the alternator. Make sure all nuts are off the bolts. Do not loosen the bolts that hold the alternator together. Remove the belt. Now slide the alternator off the mounting bolts. Slide the new alternator onto the two seating bolts, then hand-tighten them. Then slide the next bolt through the alternator and into the engine block.Slide the new alternator onto the two seating bolts, then hand-tighten them. Then slide the next bolt through the alternator and into the engine block. Now tool-tighten all the bolts to secure the new alternator to the engine block.
How to Replace belt tensioner on 2000 Chevy cavalier?
Remove serpentine belt. Remove alternator. The bolts that hold the tensioner on are under the alternator.
How do you change an alternator in a 1986 Chevy Celebrity?
To change the alternator in your 1986 Chevrolet Celebrity: 1, Remove the battery ground cable. 2. Unplug remove the wiring from the alternator. 3. Loosen the bolts that hold the alternator in place. Remove the drive belt. 4. Remove the bolts and the alternator will pull out. Reverse the process to reinstall the new alternator.
How do you tighten a belt on a 1996 Dodge pickup?
If it's the alternator belt, loosen the bolts holding the alternator in place, then use something like a hammer handle to pry the alternator away from the engine which will tighten the belt. Hold the pressure on the alternator while tightening the bolts. This is a general procedure, not specific to 1996 dodge.
How do you replace an alternator on a 2001 Montero sport?
Disconnect the battery. Loosen and remove the serpentine belt. Unscrew the bolts that hold the alternator in place and remove it. Disconnect the wires that still hold the alternator to the vehicle. Connect the new alternator to the wires and screw it back in place. Replace the serpentine belt.
How many bolts hold the starter on your 1988 B2000 pickup?
2 bolts hold it on
