0
Dime sized bolts.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you remove alternator on 1998 Saturn ls?
open hood. take out bolts. hold in hand. unplug wires. all done
How many bolts hold on an alternator for a 2000 Ford Focus?
2
Where are the bolts that hold the alternator on the car located?
Depends on the car. Usually, they are right on the bracket that holds the alternator in place.
How many bolts hold on an alternator on a 2001 Chrysler Town and Country?
Three.
How do you replace the alternator in a 87 Trans Am?
take the belt off the alternator and take out the 3 bolts that hold the alternator to the engine and unplug the wires that plug into it and you have it off.
How do you remove the alernator from a 1997 Eldorado?
loosen the tentioner on the alternator. This will disattach it from the pulley. Then simply remove the bolts that hold the alternator to the block.
How do you replace Chevy Cavalier alternator?
Remove the bolt on the lower front side and two more bolts on the rear of the alternator. Make sure all nuts are off the bolts. Do not loosen the bolts that hold the alternator together. Remove the belt. Now slide the alternator off the mounting bolts. Slide the new alternator onto the two seating bolts, then hand-tighten them. Then slide the next bolt through the alternator and into the engine block.Slide the new alternator onto the two seating bolts, then hand-tighten them. Then slide the next bolt through the alternator and into the engine block. Now tool-tighten all the bolts to secure the new alternator to the engine block.
How do you replace alternator 1998 dodge caravan 3liter 6 cly?
Remove the belt first, then there are two 15mm bolts that hold it in place. Remove those and it should just wiggle right out.
What size bolts hold calipers on a 1998 Chevy prizm?
You need 54mm bore bolts for a caliper for a 1998 Chevy Prism.
How to Replace belt tensioner on 2000 Chevy cavalier?
Remove serpentine belt. Remove alternator. The bolts that hold the tensioner on are under the alternator.
How do you change an alternator in a 1986 Chevy Celebrity?
To change the alternator in your 1986 Chevrolet Celebrity: 1, Remove the battery ground cable. 2. Unplug remove the wiring from the alternator. 3. Loosen the bolts that hold the alternator in place. Remove the drive belt. 4. Remove the bolts and the alternator will pull out. Reverse the process to reinstall the new alternator.
How do you tighten a belt on a 1996 Dodge pickup?
If it's the alternator belt, loosen the bolts holding the alternator in place, then use something like a hammer handle to pry the alternator away from the engine which will tighten the belt. Hold the pressure on the alternator while tightening the bolts. This is a general procedure, not specific to 1996 dodge.
