Depends on evap temperature. It is then loosely placed in the low, medium or high category and assign a BTU/h equivalent.
1/3 hp
3
1 ton = 12000 BTUs
To convert refrigeration tons (RT) to kilowatt-hours (kWh), you need to know the efficiency of the refrigeration system. Multiply the RT by 12,000 (which is the number of BTUs per hour in one refrigeration ton) to get the BTUs per hour. Then, divide the BTUs per hour by the system's efficiency to get the kWh required.
In refrigeration the cooling capacity may be expressed in BTUs/hr or tons of refrigeration. One refrigeration ton is equal to 12000 BTUs per hour. This equivalency comes from the comparison of the energy required to melt one tom of ice in 24 hours and the energy in the number of BTUs/hr to achieve the same transfer of energy.
A 3-ton heat pump typically has a heating capacity of around 36,000 BTUs per hour and a cooling capacity of around 36,000 BTUs per hour as well. These units can vary based on the specific model and efficiency rating.
Well, honey, a 2 horsepower air conditioner typically produces around 24,000 BTUs per hour. So, if you're looking to cool things down, just remember that number and you'll be good to go. Just don't expect it to make you any cooler than Betty White in a snowstorm.
4800 BTUs will 150 square feet.
A small room is about 5,000 BTUs. Most people don't have a room that would require more than 10,000 BTUs.
90,000 BTUs - the 090 is what tells you the BTUs of the unit.
5,000
There are approximately 6,700-8,300 BTUs per pound of lignite coal. A ton of lignite coal contains 20-24 million BTUs.