0
How many clock pulses required to load 4bit SIPO register and transfer the data to a output register?
Wiki User
∙ 11y ago
16
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How many clock pulses are required to enter a byte of data serially into an 8 bit shift register?
8
How many clock pulses are required to shift a byte of data into and out of an eight-bit serial in-parall out shift register?
9, 8 to shift the bits in & 1 to move the byte into another register.
What is d difference between serial and parallel data transfer?
As an example of serial data transfer using the shift register approach, a set of four shifts triggered by clock pulses places the contents of the X-register into the Y-register. Since four clock cycles are needed, it is much slower than parallel transfer, but is simpler and cheaper. The illustration below shows the parallel transfer of 8 bits of data from the X Register to the Y Register upon application of an enabling transfer pulse. Clearly, parallel data transfer is faster than serial data transfer, but serial transfer has the advantages of requiring less hardware. These registers are made up of D flip-flops, which can serve as memory locations. The information in the X Register is intact after the transfer to the Y Register, so this process shows a possible scenario for accessing digital information stored in memory.
What is the number of dc pulses in the output of a full-wave rectifier whose input frequency is 50 Hz?
Output of the 50 Hz full-wave rectifier consists of 100 Hz positive pulses.
What is the output from an AND gate if the two inputs each carry a pulse?
The output from an AND gate is TRUE if both inputs are TRUE. If each input is given a pulse, the output will pulse, but only for the time that the two input pulses overlap each other in time. If the input pulses do not overlap, the output will do nothing.This answer assumes that the input pulses are from FALSE to TRUE and back to FALSE. In the reverse case, the output will pulse whenever either input is pulsed and, if the inputs overlap in time, the output will simply be one longer pulse.
What is the rainfall required for pulses?
Temperature: 200c to 250cRainfall: 50cm to 75cm
In what type of soil in which pulses grow?
For lentils(masoor) and other pulses,loamy soils,which drain water easily,are required.
What is the temperature required for the growth of pulses?
Climatic condition :Temperature: 20° to 30°C Rainfall: 50° cms to 75 cmsSoil:Conditions required for pulses: These can be grown on all types of soils but a dry light soil is best suited.
How does information flow from North America to Europe?
Fiber optic wires along the ocean transfer the information in the form of pulses of laser.
Why cant capacitor filter connected in series to load?
in output is pulsetting voltage remove the pulses to use the capacitor this passes the pure voltage to the load
How many clock pulses are required by adc0804 ic to complete one analog-to-digital conversion?
Approximately 70
What is geographical conditions required for the growth of Pulses?
Pulses require well-drained soil, ample sunlight, warm temperatures, and moderate rainfall for optimal growth. They thrive in regions with a dry climate during the maturation period to prevent fungal diseases. Additionally, pulses grow well in areas with nitrogen-fixing bacteria in the soil, as they help enhance plant growth.
