I have re-read your question several times and can not understand it. Sorry
How many CFM for one ton of cooling
uhhh, you got any gum
It varies, but most are around 800-850 cfm.
depends on the cooling required ex:-suppose if cooling upto 20c is required the area cooled will be higher as compared to cool upto 15c...........
Manual J calculation. Many programs are available online for a fee.
According to the NEC, if the ground rod supplements another grounding electrode such as a metal water pipe, you are required 1. If the ground rod or rods is your only grounding electrode, you are required at least 2, at least 6 feet apart. Check with your local jurisdiction for local requirements.
Sand will absorb cooling anti-freeze that has leaked onto the ground. Many auto-parts stores will offer other synthetic substances to absorb automobile fluids.
Many areas of hot deserts can exceed 110 degrees F. in the summer so air cooling is required for comfort.
Many possibles, coolant leakage,headgaket,plugged radiator, stuck thermostat, bad cooling fan, coolant sensor, radiator fan relay, ECU malfunction, rodents chewed on the ground wire for the cooling fan, or about 20 other possibles
There is only one ground wire needed on any motor, single or three phase.
Yes you can. You did not say how many amps were required.
50 % water to anti freeze mix its about 8 liters in a 406 so 4liters of anti freeze 4 liters of water