Want this question answered?
It is the area that you see when looking through the microscope. The field of view depends on the strength of magnification. The lower the power the larger the field of view.
The field of view becomes narrower.
Since the field of view is a circle, the size of the field of view is it's area. You would need to find the diameter of the field of view, using a transparent ruler or a micrometer. Divide the diameter measurement by 2 to get the radius. Then use the formula for the area of a circle, Area = πr2. For example, you measure the diameter of the field of view to be 2.14mm. Divide 2.14mm by 2 to get the radius, and you get 1.07mm. Square 1.07mm, which is 1.14mm2. Multiply x 3.14 (pi), and you get 3.58mm2. So the field of view for this example would be 3.58mm2.The field of view differs with different magnifications. The lower the magnification, the larger the field of view.
how can the field of view on a compound microscope be made brighter
The lens with the smallest magnification has the largest field of view.( usually 4x)
this term is often confused with angle of field and field of view. The angle of view is the (diagonal) angle subtended by the scene captured in the photograph. This establishes the disc of best definition required for the lens. The angle of field is the angle subtended at the lens rear nodal point by the diagonal of the format itself. In a rectilinear image this is the same as the angle of view, but not for anamorphic images such as those produced by fisheye lenses. 'Field of view' simply describes the area covered in a scene. For example, although the angle of view of a fisheye lens is 180 degrees, its angle of field may be as low as 90 degrees. The field of view may be described as 'horizon to horizon'. For a standard (prime) lens the angle of field is typically 50-55 degrees, the same as the angle of view, and the field of view is roughly the same as that of the eye in a normal viewing of a scene or a picture.
Depending on how many cells there are in the field of view. On medium power, you may not be able to see any.
65percent.
low
The field of view or field of study is what you see when you look throughout the OCULAR lens
If it is in the driver's field of view, yes.If it is in the driver's field of view, yes.
It is the area that you see when looking through the microscope. The field of view depends on the strength of magnification. The lower the power the larger the field of view.
the field of view is what is seen under the microscope through the specific magnification
Field of view ^-^ Field of view >.< xD
The ten degrees over viewpoint posits a slight upward angle from the normal perspective, providing a broader field of view while maintaining a balanced composition. This technique is often used in photography and cinematography to add depth and interest to the subject.
The visibility of the specimen decreases as the power of magnification increases on a microscope. The specimen area will shrink as the magnification is increased.
The field of view becomes narrower.