0
What else can I help you with?
How surface tension behaves?
for example, if drops of water are placed on the top of a penny, the surface tension is going to hold the drops on top of the penny. when the penny can hold no more, it will all overflow. make sense?
Science fair project topics?
how many drops of water can a penny hold? topic: crazy penny........
What will hold the most drops of liquid on a penny soda water or milk?
milk
Why does your penny hold so many drops?
it is big inside but small out side
What variables may play a factor in the amount of drops the penny hold?
Several factors can come into play here.The size of the dropsHow fast the liquid is being droppedWhat type of liquid is being usedThe temperature of the liquidThe termperature of the pennyIf the penny was clean or dirtyThe height the drop falls fromAny of these things can have an effect an expansion of the liquid, surface tension, and splash.
How many drops of water can fit on a US penny?
Approximately 30 to 35 drops of water can fit on a US penny before spilling over. The surface tension of the water allows it to form a dome-like shape on top of the penny, holding more drops than you might expect.
How many drops of water can a penny hold on its surface?
Water has a surface tension. When dropping water on a penny, people usually underestimate how much water the surface of a penny can hold. The surface tension of water is strong on a smaller surface, and when dropping water on the surface of a penny, towards 20 drops the water on the penny will look like it is bulging out a lot. It really depends, depending on which side of the penny you are using, it ranges from 6 to even 34 drops using a simple eyedropper. Because eyedroppers do not produce the exact same size of drops every time, the result is not very accurate. To be even more accurate, scientists use accurate distributing machines and a very new penny to determine how many drops of water it can hold without vibrations. There could be certain amounts of grime and dirt on a penny, depending on how old it is, which can affect how much water can be put onto it. Different types of water can also change how much a penny can hold. Tap water has certain amounts of chemicals in it, and that could also affect the weight and surface tension of the water on the penny. The height of which the water comes off from matters too, the more force of the water that comes down, the more likely the water on the penny is to splash and spill. The place the water lands on also has an effect on it. To be even more accurate, light has a mass. If light shines directly at the water on a penny, it could push it a tiny bit. This change is impossible to see, and it has basically no effect on the penny or water at all whatsoever. Remember, all tests may not be 100% accurate, and there may always be a chance that there is a better way to make a penny hold more droplets of water than the presumed "most advanced and accurate" way.
Why does a penny hold water?
sit the glass of water on the penny
Does an old penny or a newer penny hold more water?
See Relevant Answers.
Why does a penny hold so much water?
A penny can hold a significant amount of water due to its surface tension properties. The water molecules adhere to each other and the metal surface of the penny, preventing the water from spilling over the edges. This allows the water to collect and form a convex meniscus on top of the penny.
How can so many drops of water fit on a penny?
It all depends on if you drop the water fast or if you drop it slow. Ideally, everyone performing the experiment would include the following: - distilled waterThere are a lot of factors involved. The cohesion and adhesion ('stickiness') of water molecules can be effected by things like oils (on surface pennies from peoples' skin) and other contaminates on the penny. The size of the dropper or pipette will determine the size of each water droplet - the larger the drop, the fewer number of drops will fit on the penny. The manner in which the water is added to the penny is also a factor. Water has a cohesive nature (the molecules are kind of like magnets and are attracted to one another). Therefore, if the drop from the pipette is allowed to touch the water already on the surface of the penny, the water can be 'pulled' out of the dropper. When this happens, the size (volume) of the drop is not always the same - it could be a very small amount (which will result in a very large number of drops), or a large amount. Soap causes the cohesiveness ('stickiness') of the water molecules to decrease so they are not as strongly attracted to each other. Because of this, when soap is added to the water the number of drops that can be placed on the penny will decrease. The water molecules can't 'stick' together as well, so the water on top of the penny spills off sooner than it would with non-soapy water. Ideally, everyone performing the experiment would include the following: - distilled water (to start with) - same type/size of calibrated dropper/pipette - same date of penny - penny cleaned as thoroughly as possible using same cleaning procedure - same 'dropping' procedure
What variable should you hold constant?
Neutrons
