answersLogoWhite

0

sorry don't

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

How many gallons of water per minute does a low flow shower head use?

About 1.25 gallons per minute.


What is Gallons Per Minute of Water at ten Foot of Head?

The flow rate (gallons per minute) will depend on the cross-sectional area of the pipe.


What shower head uses the most gallons of water?

Standard high-flow aka unrestricted shower heads made before 1995 were water-guzzlers. As of 1995 shower heads must be low-flow, with a rate of 2.5 gallons per minute.


What is the optimal shower head flow rate for conserving water while still providing a satisfactory shower experience?

The optimal shower head flow rate for conserving water while still providing a satisfactory shower experience is around 2.5 gallons per minute.


How many gallons of water does that average shower use?

It mainly depends upon the showerhead.The original generation of showerheads typically dispensed 3.5 to 5.0 gallons per minute (gpm) which would be between 13 and 19 liters.The first generation of water-saving showerheads dispensed about 2.2 to 2.5 gpm, which would be roughly 9 liters. In the USA, federal law requires new showerheads to have a rate of 2.5 gpm or less.The newest generation of low-flow showerheads use new engineering technology to achieve rates as low as 1.5 gpm, which is less than 6 liters.There is a huge possible range. It depends on the water pressure and the type of shower head being used.


What is head and how you can calculate it in irrigation system?

A head is the part of the sprinkler that distributes the water over the lawn. You calculate it into the irrigation system by knowing how much area one head covers and then placing them accordingly.


What does it take to operate irrigation systems?

The system is made up of a series of pipes and it is attached to a central water line. When the water is pressurized and allowed to flow through the pipes, it pushes the head of the sprinklers up and waters the lawn.


What is the optimal flow rate of a shower head for efficient water usage and a satisfying shower experience?

The optimal flow rate of a shower head for efficient water usage and a satisfying shower experience is typically around 2.5 gallons per minute. This rate allows for a good balance between conserving water and providing enough water pressure for a comfortable shower.


How much water flows from the shower head per minute?

An average flow rate cannot be determined as there are many different shower heads and each house in every country has different water pressure and not everyone may use full pressure when using a shower. But, approximately said that the average flow rate of shower water 2.5 gallons per minute at a water pressure of 80 pounds per square inch.


What is the method of irrigation in ahero irrigation scheme in KENYA?

The Ahero Irrigation Scheme in Kenya primarily uses gravity-fed irrigation methods. Water is diverted from the Nyando River and distributed through a network of canals and furrows to irrigate crops in the scheme. This method is cost-effective and relies on the natural flow of water to irrigate agricultural lands.


How many water do you need to take a ten minute shower?

depends on your shower and shower head. If you are using a standard single shower head, in California the shower heads have regulators installed so they do not allow more than 2 gallons per minute, and some areas that is even reduced to 1.5 gallons per minute.First, you must find the gallons per minute (GPM) of the shower head. (You can request a "flow bag" from your local water agency/supplier) Follow the directions on the bag to measure the gallons per minute. . Most showers range from 2-4gpm. If you know your flow or gpm, then you can simply find how many gallons are used in a 10 minute shower. GPM x minutes. This would be a GREAT exercise for an elementary student since the math is relavent.what if you are 10 and you have to do this for school homework!For those of you who do not wish to measure your shower's gpm, the National Standard in the US is 2.5 gpm, and nearly every shower head available in stores complies with it (though some with a lower flow rate are available).ANS 2 - A 10 minute shower will use 25 -30 gallons of water.Most standard shower heads use 2.5 gallons of water per minute. That would mean in a 10 minute shower, you would use 25 gallons of water. Low-flow shower heads are available to cut down on water consumption and still provide a comfortable shower. There are models available that use 2.0 gallons per minute, and even some that use 1.5 gallons per minute. You can use an internet search to help you find an affordable low-flow shower head so you can do your part in conserving our natural resources.20 -24 gallons.


How many gallons per min does a head put out on average?

with the flow restrictor in place a shower head will put out a maximum of 2.5 gallons per min. a body spray between 1.6 and 2.0 gpm and a rain head between 2.5 and 4.5