3360
An international acre is 4840 square yards or 6,212,640 square inches.An imperial gallon is 277.14 cubic inches.6,212,640 divided by 277.14 = 22,610 gallons approximately.A US liquid gallon is 231 cu inches hence 1 acre inch = 27,154.3 US gallons (rounded)
Well, you know there are 43,560 square feet in an acre, and you know there are 12 inches to a foot. The next clue you need is a conversion factor from volume in gallons to the units of area, which in this case is inches; so, there are 231 cubic inches to a gallon. You now have all the information you need to algebraically determine the number of gallons in an acre inch.
There are far too many variables to say. The answer to this will be relaitive to your location, and you would need to take some measurements in your local area. The best way to calculate this would be to take a sample (say 1 foot square) and multiply your results by the number of square feet in one acre. A suggested means would be to use a rain gauge with a 1 foot square funnel, to measure total rain fallen on the area. then you would need to asertain the drop size. I would use a sheet of tissue paper, weigh it, then allow it to be hit by a single drop of average size, and then re-weigh. 1 gram will equal 1 millilitre, and thus you can work out how many drops by dividing your total water in your sample area. You may want to use a normal rain gauge in addition to this in order to get an acurate idea of when you acheive a 1 inch rainfall.
according to the USGS, 1" of rain peracre = 27,154 gallons; so 1" of rain on 100 acres would be 2,715,400 gallons
An acre furrow slice is the volume of soil in an acre at 6-7" depth. One AFS weighs 2,000,000 lbs. The depth is based on the depth old farmers used to till their fields at.
1 acre = 43560 sq.feet. 1 foot deep water over an acre is 43560 cubic feet, which is 325851.4 gallons in 1 foot deep. If it is 1 inch deep (1/12 foot) then it is 27154.3 gallons in 1 inch deep.
27,154
It depends on the depth of the water. Assuming the water in one inch deep, there would be about 13,577 gallons of water in the half acre.
An international acre is 4840 square yards or 6,212,640 square inches.An imperial gallon is 277.14 cubic inches.6,212,640 divided by 277.14 = 22,610 gallons approximately.A US liquid gallon is 231 cu inches hence 1 acre inch = 27,154.3 US gallons (rounded)
12.62 acre-inch contains 342,687.09 US gallons. (1 acre-inch is 27,154.3 gallons)
27,150 gallons.
An inch of rain implies water one inch deep per surface area. An inch of rain equals 5.61 gallons per yard. An inch of rain equals 27,150 gallons per acre.
1/16 acre-inch is about 1,697 US gallons.
1 acre is 6,272,640 square inches. Since you want to cover it one inch deep you need 6,272,640 cubic inches of water. There are 231 cubic inches in a gallon. So divide 6,272,640 by 231 and you get 27,154.2857 gallons! HOWEVER: If you want to save water, consider this: When water freezes, it increases in volume about 9%. So if you used ICE to cover your acre and only needed the ice to be 1 inch deep, you could use 9% less water to start with! (I'll let you do the math on that.) Ice is still water, so unless you are asked to use LIQUID water this question has 2 answers.
30.55 gallons (rounded) for every inch the water in the tub is deep.
21.76 US gallons of water.
359 gallons for every inch the water is deep.